liftstar Scissor Pallet Truck warehouse forklift

Warehouse forklift mainly for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as manual pallet truck) is the use of human-driven, others are driven by an electric motor, because the body is compact, mobile and flexible, light weight and good environmental performance Hand lifter‍ and have been widely used in the storage industry. When multi-shift operation, the motor-driven warehouse forklift battery backup needed.

① Electric Pallet Truck

Carrying capacity of 1.6 to 3.0 tons, the operating channel width is generally 2.3 to 2.8 m, fork lift height is generally around 210mm, mainly for horizontal transport and cargo handling within the warehouse. Generally there is a walk-and Stand-two operation modes, can choose according to efficiency requirements.

② electric pallet stacker forklifts

Carrying capacity of 1.0 to 1.6 tons, the operating channel width is generally 2.3 to 2.8 m, in the structure of the door frame more than electric pallet trucks, fork lift height is generally within 4.8 Drum Truck‍ meters, mainly for cargo warehouse stacking and loading and unloading.

③ reach truck

Carrying capacity of 1.0 to 2.5 tons, the whole door frame can be moved forward or retracted retracted operating channel width is generally 2.7 to 3.2 m, lifting height up to about 11 meters, commonly used in the warehouse of medium height stacking, taking cargo operations.

④ electric pickers

In certain conditions (such as supermarket distribution centers), does not require a whole pallet shipments, but in accordance with the order picking up a variety of species of cargo pallets, this link is called picking. Chosen according to the height of the goods, electric order pickers pickers can be divided into low (within 2.5 m) and the high order pickers (up to 10 m).

Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in high, with cab upgrade).

⑤ low driving three stacking forklift

Usually equipped with a three-stacking head, do not need to turn the truck, fork rotation can be achieved and pick up the goods stacked on both sides of the channel width of 1.5 to 2.0 m, lifting height of up to 12 meters. Truck cab can not always upgrade on the ground, taking into account the limitations of the operative field, mainly for lifting height of less than six meters working conditions.

⑥ three high stacking forklift driver

And low driving similar three-stacking forklift, driving three Manual stacker‍ high stacking forklift is also equipped with a width of 1.5 to 2.0 m three stacking head, channel, lifting height of up to 14.5 meters. Its cab can be improved, the driver can clearly observe any height goods can also be picking operations. Three high stacking forklift driver in a variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has been gradually replace the low three-stacking forklift driver.

⑦ electric tractor

Using a motor-driven tractor, with its towing capacity (3.0 to 25 tons), followed by pulling a few car loading cargo. Often used for transportation between the workshop or workshops bulk goods, such as automobile manufacturing warehouse to the assembly line of transportation, airport baggage.‍

shop crane Note the use of pressure maintenance and truck scales

, the problems of interpretation:

1, place heavy objects not too far before (ie two tines tip section)

2, field calibration weights low quality

3, truck use the right way, try not to weigh in on the move

4, does not exclude transport, Drum Truck‍ squeeze, drag a heavy object, secretly calibration possible

5. ban the barbaric use

Two measures:

A re-calibration

① weight greater than 1T, less than 2T (1.5T calibration)

② forklift raised about 2cm calibration

③ placement in the middle of the table after partial (handle section)

2, was called before the weight can not be partial, that can not go beyond the front end of two head position sensors, such as pallets, pallet tines must not exceed

3, as well as weighing error:

Methods ①: The truck rose to the highest, Hydraulic fixed lift table‍ with a piece of paper inserted into the scales cover the four sides of the fork gap paddling around to see if there are places on the list, if the problem can be a suitable tool by Alice from

Method ②: raise tines cover, loosen the sensor retainer, with a large flathead screwdriver to adjust upwards, and then loaded on retainer can be. If there is no adjustment screw on the sensor, you can then remove the tines loosen the retainer cap, then the cap under the four screws in 2-3 turns can be.

Methods ③: Check to see whether the touch retainer rod, such as touch directly remove the retainer, try scales once, if not installed removable retainer useful.

Truck, hand pallet trucks, forklift trucks, manual hydraulic Hand lifter‍ stacker, hydraulic truck scales, hydraulic forklift, said hydraulic pallet truck scales.

Scissor Pallet Truck to the use of units ( personnel) in order to use the safety technical tests

the construction site should have a variety of lifting equipment lifting platform technical notes , played certificate, safety rules , operating biographical books.
2 , lifting machinery installation after installation and acceptance by the relevant departments to participate Hand lifter in the installation of the unit , and to the use of units ( personnel) in order to use the safety technical tests . Should be approved subject to mechanical power sector Where mechanical team to innovate .
3 , lifting equipment should have a variety of security, two insurers , four full limit must be sensitive and reliable not to overload the signal commanding officers must be trained Forklift Jack certification examination , allowed undocumented command posts .
4 , we must establish someone plane, is relatively fixed, and to develop a post responsibility system or commander responsible for the system , shift system, regular maintenance system .
5, the machine operator to conduct specialized training , assessment certificate issued to the safe operation of the lift platform after passing a separate operation before induction .
6 , various types of machinery must strictly abide by the rules , Do not drink and operate, earnestly implement the three no's : that allowed maintenance during operation , the device sick are not allowed to run , are not allowed to overload . Should be strictly checked before work is solid and reliable protection devices and machinery is functioning well, the operation can be carried out after passing the examination .