shop crane Note the use of pressure maintenance and truck scales

, the problems of interpretation:

1, place heavy objects not too far before (ie two tines tip section)

2, field calibration weights low quality

3, truck use the right way, try not to weigh in on the move

4, does not exclude transport, Drum Truck‍ squeeze, drag a heavy object, secretly calibration possible

5. ban the barbaric use

Two measures:

A re-calibration

① weight greater than 1T, less than 2T (1.5T calibration)

② forklift raised about 2cm calibration

③ placement in the middle of the table after partial (handle section)

2, was called before the weight can not be partial, that can not go beyond the front end of two head position sensors, such as pallets, pallet tines must not exceed

3, as well as weighing error:

Methods ①: The truck rose to the highest, Hydraulic fixed lift table‍ with a piece of paper inserted into the scales cover the four sides of the fork gap paddling around to see if there are places on the list, if the problem can be a suitable tool by Alice from

Method ②: raise tines cover, loosen the sensor retainer, with a large flathead screwdriver to adjust upwards, and then loaded on retainer can be. If there is no adjustment screw on the sensor, you can then remove the tines loosen the retainer cap, then the cap under the four screws in 2-3 turns can be.

Methods ③: Check to see whether the touch retainer rod, such as touch directly remove the retainer, try scales once, if not installed removable retainer useful.

Truck, hand pallet trucks, forklift trucks, manual hydraulic Hand lifter‍ stacker, hydraulic truck scales, hydraulic forklift, said hydraulic pallet truck scales.

drum truck Forklift Battery safe use and maintenance of the six points

A routine inspection

     1, the liquid level: below the rated level, will shorten battery life, and too little will result in the battery electrolyte heat damage, therefore, must always pay attention to the adequacy of the electrolytic solution.

     2, terminal, wire, cover: You must always check the Hand stacker‍ battery terminal junction, and the connection wires caused by oxidation due to corrosion, and check whether the deformation of the lid, is there fever phenomenon.

     3. Appearance: battery dirty surface will cause leakage, so that the battery surface should be ready to clean and dry.

     Second, the maintenance

     1, add water: according to the level specified in distilled water, do not add water to prolong the interval and add too much distilled water, add too much water will overflow cause electrolyte leakage.

     2, charging: the battery charging process will produce gas, the charge should be kept ventilated place, no fire around, while charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging unplug the charger plug arcing, after charging the machine turned off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover on Hydraulic fixed lift table‍ the battery charge.

     3, terminal, wire, cover maintenance: must be specified by the manufacturer of professional and technical personnel are available.

     4. Clean: If dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally.

     Third, custody

     1. Storage place: You can not make a short circuit; cause a short circuit may occur due to rain fire and may produce a small amount of hydrogen, the battery must be stored in a ventilated, cool place.

     2, scrap batteries: waste battery power is still there, Drum Truck‍ should be kept in accordance with the methods used to store 

batteries.

liftstar Scissor Pallet Truck Fourth, the operation of the electrolyte

     1. Check the specific gravity: Use a hydrometer to check the proportion of inhalation, do not let the electrolyte spill out of the job, and to wear protective gear.

     2, in addition to checking the operation Hydraulic fixed lift table‍ of: professional advice should be, especially the electrolyte (sulfuric acid) when supplemented.

     3, electrolyte leakage: As the battery tipping, breakage resulting in electrolyte leakage, should be urgently addressed immediately (see emergency matters)

     Five, end of life battery operation

     1, the end-of-life battery operation: When the battery near the end of life, single-cell battery electrolyte within the subtractive very fast, distilled water should be added every Straddle stackers‍ day.

     2, treatment of waste batteries: For used batteries, out of the electrolyte, the battery exploded. Can discuss whether the recovery from the battery manufacturer.

     Six emergency treatment

     An electrolyte splashed on skin: Flush with plenty of water

     2, electrolyte splashed in the eyes: rinse with plenty of water, and then receive professional medical treatment

     3, the electrolyte spilled into clothes: immediately took off his clothes, rinse with water and then rinse with a weak alkaline soap.

     4, electrolyte leakage: the electrolyte leakage to the Counter-balance Stacker‍ outside immediately with lime, strong carbonated soda or carbonated soda to neutralize etc., and rinse with plenty of water.

drum truck Two major painting equipment

2.1 through shot blasting chamber

By shot-blasting chamber consists of the cleaning chamber body, shot blasting, projectile circulatory system, ventilation and dust removal system, the bottom of the Hydraulic fixed lift table‍ foundation and electrical control systems drum truck. Sizes can be designed according to different non-standard specifications of the workpiece, the device can also be used stereotypes.

By shot-blasting room for construction machinery structure, surface cleaning malleable pieces, strengthen, and thus obtain a certain roughness and smooth surface, increasing the coating adhesion, improve workpiece anti-corrosion effect. When the workpiece into the blasting chamber by a motor driven centrifugal blast wheel forklift jacks‍ speed projectiles thrown, the strong impact of the workpiece surface rust, scale. Workpiece uniform motion or rotation after several clean, surface quality can be achieved grade Sa2 ~ Sa2. 5 standards.

shop crane How safe loading and unloading vehicles.

     A two conflicting performance materials, not while loading and unloading. Of heat intolerance, fear the influx of materials, to take heat, moisture lift mover‍ handling measures shop crane.

     2, the handling of dangerous goods should be light to move gently to prevent collision friction, throw touch vibration. Liquid metal pail destacking, should not use fast humping way packaging to prevent breakage. Repairer of damaged packaging can be moved to a safe location, renovated after handling, may not use the tools that may occur when sparks renovation.

     3, after the completion of loading and unloading operations, should wash their hands, face, mouth rinse or bathe. Midway may not diet, smoking. And must be kept on-site air circulation to prevent contamination of the skin, mucous membranes. Handling found dizziness, dizziness and other poisoning, first aid knowledge by ambulance, weight should be immediately sent to hospital for treatment.

     4, items scattered on the ground, should be promptly removed. No value for the sweep up waste, should use the appropriate disposal physical or chemical methods, to ensure Hydraulic fixed lift table‍ safety.

     5, before loading and unloading of dangerous goods vehicles, you must strictly enforce the rules and relevant regulations, prepare in advance, carefully check the material handling tools and operating equipment. After the work is completed, the tool above the contaminated material must be removed to prevent conflicting substances cause a chemical reaction. For tools operated oxidant items before after cleaning must be cleaned.

     6, the job site should be a unified command, with clear command signal fixed, so as to work methodically to avoid confusion that job accidents. Handling the job site personnel and equipment operators should strictly observe labor discipline, obey orders.

     7, a variety of handling equipment, safety procedures must be developed, through the operation by trained personnel to operate full-time, to prevent accidents.

     8, the operator can not wear shoes with nails. Depending on the hazardous properties and should wear appropriate protective equipment separately. Of toxic and corrosive substances, but also to greater attention should be appropriate to consider a period of time after the operation, a breath of fresh air, to avoid hand jack‍ poisoning. After the operation is completed, the protective equipment should be cleaned or disinfected to ensure personal safety. Various protective equipment should be the person responsible for the custody of special reserve.

‍

drum truck Truck, Stacker performance criteria

When integrated assessment, many companies due to truck expertise and technology do not understand, and often the quality of products can not make a reasonable judgment. Hydraulic fixed lift table‍ In general, the quality of the van and its superior performance is often reflected in the high efficiency, drum truck, high reliability, good ergonomic design, and convenient services, and many other aspects.

1, high efficiency

High efficiency does not only mean speed (driving, lifting, lowering speed), it also means that the operator time required to complete a work cycle is short, and can work in the whole time and always maintain this efficiency. Many factors can promote efficiency: low speed, such as speed, lifting and lowering speed; palle stackers‍ ergonomic design of the application, reducing the number of actions of the operation; precision operation; ergonomic design applications, maximum reduce fatigue; good vision.

2, low-cost

The total cost of the purchase and use of the van business, the annual cost of the required include: procurement costs; maintenance costs; energy costs; labor costs.

Procurement costs will be amortized to the life of the truck. So expensive truck will last longer leaving its purchases to reduce costs. The actual cost of maintenance and repair costs not only parts, but also to the failure rate or downtime related. Therefore, a high-quality truck, due to its low failure rate, its maintenance costs are lower. Energy costs will vary with different truck and a different power system, such as electricity, diesel, liquefied petroleum gas or gasoline. Labor costs is with the driver's number and their total monthly wages in different Manual drum Stacker‍ variations, the number of drivers will be due to the use of high efficiency and reduce truck.

liftstar Scissor Pallet Truck Forklift

Whenever immediately saw someone riding a bike, "slightly creak" "slightly creak" sound, I knew his car broke down. Bicycles can be seen that the bike itself from the lift mover‍ problem of abnormal sound scissor Pallet Truck.

     Forklift is no exception, so when the truck appeared abnormal sound, be sure to check, then what changes forklifts different sound you:

     Forklift different sound is constantly changing, usually from small to big, if not rule out damage to the body or parts.

Abnormal sound changes are generally divided into three phases. Chongqing forklift rental

Early: slightly different sound when little wear influence.

Interim: volume gradually increases, increased Hydraulic fixed lift table‍ mechanical wear and tear.

Late: a significant increase in volume, will have serious consequences.‍