drum truck Forklift Battery safe use and maintenance of the six points

A routine inspection

     1, the liquid level: below the rated level, will shorten battery life, and too little will result in the battery electrolyte heat damage, therefore, must always pay attention to the adequacy of the electrolytic solution.

     2, terminal, wire, cover: You must always check the Hand stacker‍ battery terminal junction, and the connection wires caused by oxidation due to corrosion, and check whether the deformation of the lid, is there fever phenomenon.

     3. Appearance: battery dirty surface will cause leakage, so that the battery surface should be ready to clean and dry.

     Second, the maintenance

     1, add water: according to the level specified in distilled water, do not add water to prolong the interval and add too much distilled water, add too much water will overflow cause electrolyte leakage.

     2, charging: the battery charging process will produce gas, the charge should be kept ventilated place, no fire around, while charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging unplug the charger plug arcing, after charging the machine turned off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover on Hydraulic fixed lift table‍ the battery charge.

     3, terminal, wire, cover maintenance: must be specified by the manufacturer of professional and technical personnel are available.

     4. Clean: If dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally.

     Third, custody

     1. Storage place: You can not make a short circuit; cause a short circuit may occur due to rain fire and may produce a small amount of hydrogen, the battery must be stored in a ventilated, cool place.

     2, scrap batteries: waste battery power is still there, Drum Truck‍ should be kept in accordance with the methods used to store 

batteries.

liftstar Scissor Pallet Truck Fourth, the operation of the electrolyte

     1. Check the specific gravity: Use a hydrometer to check the proportion of inhalation, do not let the electrolyte spill out of the job, and to wear protective gear.

     2, in addition to checking the operation Hydraulic fixed lift table‍ of: professional advice should be, especially the electrolyte (sulfuric acid) when supplemented.

     3, electrolyte leakage: As the battery tipping, breakage resulting in electrolyte leakage, should be urgently addressed immediately (see emergency matters)

     Five, end of life battery operation

     1, the end-of-life battery operation: When the battery near the end of life, single-cell battery electrolyte within the subtractive very fast, distilled water should be added every Straddle stackers‍ day.

     2, treatment of waste batteries: For used batteries, out of the electrolyte, the battery exploded. Can discuss whether the recovery from the battery manufacturer.

     Six emergency treatment

     An electrolyte splashed on skin: Flush with plenty of water

     2, electrolyte splashed in the eyes: rinse with plenty of water, and then receive professional medical treatment

     3, the electrolyte spilled into clothes: immediately took off his clothes, rinse with water and then rinse with a weak alkaline soap.

     4, electrolyte leakage: the electrolyte leakage to the Counter-balance Stacker‍ outside immediately with lime, strong carbonated soda or carbonated soda to neutralize etc., and rinse with plenty of water.

liftstar Scissor Pallet Truck Surface treatment of sheet metal stampings, said general chemical surface treatment.

 Process:

Pre-degreasing degreasing → → → cold hot water washing → pickling → → in cold water and cold water → surface adjustment → phosphate → cold water hot water → → → Rider Pallet Truck‍ pure water and dried

The above process may also make appropriate adjustments based on oil, rust sheet metal stampings situation, with or without pickling process, with or without pre-degreasing. The degreasing and phosphate chemical treatment process is a key step, the two processes directly affect the quality of the workpiece quality chemically treated and rust coating. Electric Hand Pallet Jacks‍ Relevant process parameters and related auxiliary equipment also affect the quality of surface __ reason can not be ignored.

shop crane Coating Process

As the project a wide range of machinery, specifications, machine weight, large parts, the general approach to spray paint. Spray tool air spray gun, airless spray gun, air-assisted forklift jacks‍ spray gun and portable electrostatic spray gun. Low air spray gun efficiency (about 30%), high-pressure airless spray gun paint waste, both common feature is more serious environmental pollution, it has been replaced by air-assisted spray gun and portable electrostatic spray gun and being. As the world's first mechanical engineering company --- Caterpillar (CAT) company on the use of air-assisted spray gun on the hood, such as sheet metal cover portable electrostatic spray gun is used. Engineering machinery coating equipment generally use more advanced water rotary spray booth. Small parts can also be used with or without a pump spray booth curtain spray booth, the former has advanced performance, the latter affordable, convenient and practical. Due to heavy construction machinery and parts machine, heat capacity, so its anti-rust coating drying, the general uniform baking hot air convection Rider Pallet Truck‍ drying method. Heat can be adapted to local conditions, the choice of steam, electricity, light diesel oil, natural gas and liquefied petroleum gas.

drum truck Two major painting equipment

2.1 through shot blasting chamber

By shot-blasting chamber consists of the cleaning chamber body, shot blasting, projectile circulatory system, ventilation and dust removal system, the bottom of the Hydraulic fixed lift table‍ foundation and electrical control systems drum truck. Sizes can be designed according to different non-standard specifications of the workpiece, the device can also be used stereotypes.

By shot-blasting room for construction machinery structure, surface cleaning malleable pieces, strengthen, and thus obtain a certain roughness and smooth surface, increasing the coating adhesion, improve workpiece anti-corrosion effect. When the workpiece into the blasting chamber by a motor driven centrifugal blast wheel forklift jacks‍ speed projectiles thrown, the strong impact of the workpiece surface rust, scale. Workpiece uniform motion or rotation after several clean, surface quality can be achieved grade Sa2 ~ Sa2. 5 standards.

drum truck Sharp high-speed driving is prohibited

Sharp high-speed driving is prohibited, in driving the process, lifting or lowering prohibited goods, etc., under the absolute prohibition of someone lifting frame drum truck‍. Across more than 7 ° Electric lifters‍ slope carrying goods should be at the top of the slope of the goods. Carriage of goods may be made to the brakes and slow speed when driving to prevent cargo slide. When transporting bulky cargo, cargo block the line of sight, the truck should reverse at low speed.

        After non-stop to the engine idling and unattended, but not allowed to hang in the air cargo and the driver leaves the driving position. Battery pallet truck after stopping midway, when the engine is idling pour back door frame, when the engine stop the carriage should fall, and leaning forward to make the goods palle jacks‍ stand with. In the course of their work, that if a suspicious noise or unusual phenomenon, must immediately stop checks, take timely measures to exclude, in the absence of fault shall be excluded before continuing operation.

       After a day of work, the fuel tank filler respond, so not only can drive out the moisture inside the tank, but also can prevent moist gas at night cemented soluble oil in water droplets. In addition, without the consent of the company leadership, no person shall use forklifts. In order to improve the life of the truck and prevent accidents, in order to maintain the best running forklifts and various parts of the normal operation, in the course of the Post lift tables‍ machine must be strictly carried out regular maintenance.

liftstar Scissor Pallet Truck Water rotating spray booth

Water spray booth known as hydraulic rotary spinning spray booth. The laminar flow chamber using a gas mist oppressive way to prevent spread of mist filter with Drum Trucks‍ hydraulic spinning tube scissor pallet truck, is technically more complete spray booth.

Water spray chamber by chamber body rotation, electric doors, mist filter, air supply and exhaust device component unit; lighting equipment installed on both sides of the body chamber, more than 500 Lux illuminance can be grouped control; interior design combustible gas concentration detection and alarm devices; mist filtration device consists of washing the plate, hydraulic spinning device, consisting of ground water tank and exhaust system, mist removal rate> 98%; air conditioning unit is the gas to form the main components of laminar flow, into the air supply chamber Air scissor lift‍ through the filter, after heating, is uniformly sent from the air supply to the room ceiling, the indoor wind speed even when no workpiece vertical wind up 0 .35 ~ 0.4 m · s - 1; exhaust means is the room with the fan body mist containing spinning pipe gas through hydraulic filters, exhaust from between the sink and wash board.