platform stacker

When operating the platform stacker always face the direction of travel, do not walk backwards.An electric pallet jack should never be operated on a ramp.
The red button on the operation handle is an emergency reverse. This button will prevent the electric Post lift tables from running you over.The electric pallet jack, with a full load, can weigh as much as a car

Carriage

• Carriage - is the component to which the forks or other attachments mount. It is mounted into and moves up and down the mast rails by means of chains or by being directly attached to the electric pallet trucks cylinder. Like the mast, the carriage may have either rollers or bushings to guide it in the interlocking mast rails
• Load back rest - is a rack-like extension that is either bolted or welded to the carriage in order to prevent the load from shifting backward when the hand truck dolly is lifted to full height
  

Mast

Electric lifters is the vertical assembly that does the work of raising and lowering the load. It is made up of interlocking rails that also provide lateral stability. The interlocking rails may either have rollers or bushings as guides. The mast is driven hydraulically, and operated by one or more hydraulic cylinders directly or using chains from the cylinder/s. It may be mounted to the front axle or the frame of the forklift. A 'container mast' variation allows the forks to raise a few meters without increasing the total height of the forklift. This is useful when double-loading pallet truck power into a container or under a mezzanine floor

forward to assist in engaging a load

The cab area may be open air or enclosed but it is covered by the Electric order picker overhead guard assembly. When enclosed, the cab may also be equipped with a cab heater for cold climate countries along with a fan or air conditioning for hot weather.
Overhead guard - is a metal roof supported by posts at each corner of the cab that helps protect the operator from any falling objects. On some forklifts, the overhead guard is an integrated part of the frame assembly.
Power source - may consist of an internal combustion engine that can be powered by LP gas, CNG, gasoline or diesel fuel. Electric forklifts are powered by either a battery or fuel cells that provides power to the electric motors. Reach fork trucks used on a forklift may be either DC or AC types.
Tilt cylinders - are hydraulic cylinders that are mounted to the truck frame and the mast. The tilt cylinders pivot the mast backward or forward to assist in engaging a load.

container transport essential equipment

manual stackers on the market to choose from many brands, models complexity, coupled with the product itself, strong technology and very professional, so the choice of models, vendor selection is a lot to buy the companies often face. This paper introduces in terms of model selection, brand selection, performance criteria and our overseas market contribution rate electric pallet trucks, industrial handling vehicles widely used in ports, railway stations, airports, garages, factory workshops, warehouses, distribution centers and distribution centers, loading and unloading, pallet handling operations in the cabin, car and container, are pallet transport, container transport essential equipment

Scope forklift

forklift truck plays a very important role in the enterprise's logistics system, is the main force in the material handling equipment. Widely used in various sectors of the national economy stations, ports, airports, factories, warehouses and so on. During World War II, Drum Trucks develop. China from the early 1950s began manufacturing forklifts. Especially with the rapid development of China's economy, most enterprises have been away from the original material handling manual handling, replaced the truck is mainly mechanized handling. Thus, in the past few years, the demand for Chinese truck market, double-digit annual growth rate

The minimum width at right angles to the channel

The minimum width at right angles to the channel: the channel at right angles to the minimum width is the minimum width for the Shop Lifter travels back and forth at right angles intersecting channel. Expressed in mm. Generally rectangular channel minimum width is smaller, the better the performance. Stacking channel minimum width: stacking channel minimum width is the minimum width of the Air lift table during normal operation