Warehousing drum truck business processes:

(Pick) the purchase of transport - Handling - (custody) temporary - Acceptance - storage - storage - periodic inventory - (consignor) of the library - Handling - Shipping
Safety requirements for forklift working device
1 door frame may not have distortion and weld sealing off phenomenon, both inside and outside the door frame roll gap adjustment should be reasonable and not more than 1.5mm, wheel rotation should hand pallet truck be flexible, wheel and axle should be free of cracks, defects. Wheel groove wear amount not greater than 10% of the original size.
2 Two lifting chain tension should be uniform, not distorted, end coupled solid, chain pitch shall not exceed 4% of the original length, or should replace the chain. Sprocket rotation should be flexible.
3. Fork not have serious distortion, weld sealing off phenomenon. Fork surface may not have cracks, open seam electric pallet jack welding phenomenon. Fork root angle not greater than 93 °, the thickness of not less than 90% of the original size. Left, right fork tip height difference must not exceed 3 percent fork horizontal section length. Fork positioning should be reliable, fork hook bearing surface, positioning surface may not have obvious defects, with the gap fork and fork frame should not be too large, and moves smoothly.
4. Lifting the fuel tank and connecting parts of the door frame should be solid, tilt cylinders and door frame, the frame is hinged to be reliable, flexible, with the gap is not too large. Cylinders should be sealed well, no cracks, smooth. At rated load, lOmin door frame from the sink is not more than 20mm, angle of no more than 0.5 °. Lifting speed at full load should not be less than half the standard value.
5. Overhead guard, backrest should be complete and effective.

Manual Scissor Scissor Pallet Truck consists of the following five components:

Manual hydraulic pallet trucks consists of the following five components:

Handle a small lever handle is small manual hydraulic pallet trucks controlled state . ;

2 tiller steering tiller is lifting frame body with the body , down and walking lever. Tiller back and hand pallet truck forth up and down the pressure , the body can slowly rise ; small teeth clenched on the tiller , can decrease the body ; pull the tiller forward and cargo vans can walk ;

From 3 hydraulic lifting system sealed up the system can meet most lifting requirements. Pump cylinder electric pallet trucks mounted on heavy-duty protective seat, chrome cylinder , piston galvanized, low control valve and pressure relief valve to ensure safe operation and manual hydraulic pallet trucks extend the service life ;

4 front and rear wheels and wheel bearing rollers are made ??of durable nylon , rolling resistance is small. Wheels fitted with sealed bearings , flexible operation ;

5 frame body and the body frame body and the body is the use of torsional steel welded forks made ??from high tensile steel channel , wedge-shaped tines made ??of round , easy to insert the tray without damaging the tray guide guide wheel forks smoothly inserted into the tray .

Electric forklift traction batteries

Electric forklift traction batteries , also known as the forklift battery . Electric forklift battery  maintenance should follow the basic precautions 10:00 :
① battery will produce hydrogen  gas , it may cause an explosion , so smoking is prohibited in the vicinity of the battery , and forbids any flame or sparks . Be sure to save the battery or charging in a well ventilated place, but do not exhaust the mouth , avoid mist cause corrosion .
② battery fluid containing hand pallet truck corrosive liquid , may cause severe burns , the need to avoid contact with skin, eyes or clothing , if unfortunate accident occurs, rinse immediately with plenty of water and seek medical advice quickly .
③ during inspection or maintenance  battery , you must use rubber gloves to avoid electric shock .
④ surface or the battery connection is important to keep it clean . Dust and other impurities must be removed with a damp clean, otherwise it will leak , causing the fire.
When ⑤ Clean the battery , be sure to use a damp cloth , do not use a dry cloth Do not use the tools connected electric pallet trucks between the positive and negative battery ⑥ .
⑦ When charging the electrolyte temperature should not exceed 50 ℃, in order to avoid damage to the electrolyte overflow , with particular attention to the summer day .
⑧ battery before pulling the plug, to avoid sparks , be sure to turn off the key switch and charger switch forklift .
⑨ Do not lower than the minimum electrolyte surface , otherwise the battery easy to heat , easy to burn .
⑩ prohibited children close .
This article from the Suzhou Industrial Equipment Sen Muda more information, please introduce you to how to safely and efficiently operate a bucket truck

he amount of pollution from the type of hydraulic system

Contamination of the hydraulic system Scissor lift sail technology classification of sources can generally be divided into the following three types.

The amount of pollution from the type of hydraulic system
     Contamination of the hydraulic system lifting sail technology classification of sources can generally be divided into the following three types. Namely;
     1. Assembly pollutants
     2. Intrusionproblem pollutants
  3. Generates pollutants
   In Hand Pallet Truck truck crane manufacturing, assembly and commissioning process, the hydraulic system is the main pollutant assembly contaminants. Cranes used in the process, pollutants are mainly generated intrusionproblem pollutants and contaminants. These pollutants and mainly solid particles such as iron, sand, ash umbrella, as well as fiber, film, welding slag, dark film, air. In the crane commissioning process, there intrusionproblem contaminants. Hydraulic system during commissioning solid particle size distribution as shown in Table 2-8. Testing method, g an optical microscope or a manual counting method.

imaginary cleaned or replaced regularly

  In the system for disassembly cleaning and replacement filters can effectively remove from the hydraulic fluid solid particles, which is one of the key measures of pollution control. Fluid passing through a good filter to prevent swarf or other large particles stuck causing elements, scratches, clogging and other faults. On the pump inlet, an important component of the inlet filter pump is installed, etc. imaginary cleaned or replaced regularly.
     3. Ensure cleanliness of hydraulic oil indicators
     Hand Pallet Truck crane used hydraulic oil should generally be maintained volume, viscosity, total acid as the main test indicators.
     Maintenance, adding crane hydraulic oil hydraulic system shall comply ZBE39002-86 "car tire from the attention and solid particles crane hydraulic oil contamination level" standard, namely: Group particulate contamination level should not exceed 18/ls, cranes used in the process hydraulic oil should not exceed 20/16; moisture limit indicators: total water content of hydraulic oil required should not exceed o. 1%; operating viscosity limit indicators; requirements kinematic viscosity hydraulic oil change should not exceed 10% of the soil; total acid number limit: Requires total acid number should not exceed o. 3m8 (KoH) / 8.
     4. Ensure that the closed nature of the hydraulic system
     Hydraulic truck crane hydraulic system to achieve dustproof and waterproof to keep the system closed, prohibited foreign material from entering the hydraulic system

Based on DeviceNet Stacker drive system

Stacker is a major automated warehouse Hand Pallet Truck equipment . It is within the top shelf of the roadway running back and forth , responsible for the goods access . Is currently the most widely roadway stacker , which consists of operating agencies , lifting mechanism , institutions with access to goods laden table , racks and electrical equipment five parts. Currently, Stacker running at speeds up 320m/min, enhance the speed of up to 60m/min, its positioning accuracy of better than ± 5mm.
DeviceNet is a Rockwell Automation Company in 1994 proposed an open fieldbus network , has become an international industrial automation network standards. DeviceNet is a simple industrial devices ( sensors, inverter, etc. ) and high-end devices (PLC, computer ) provides deterministic , reliable network connectivity and data communications. DeviceNet provides master / slave and peer to peer network communication capability and producer / customer (Producer / Consumer) service mode , you can not use any programming tool online remove or replace a device on the DeviceNet network . From ControlNet, DH + or Ethernet packets on a link can be sent to the DeviceNet ControlLogix gateway to all nodes on the link . Using DeviceNet, can reduce hardware device communication cable wiring, reducing the formation of systematic human and wiring costs, while , can provide users with a complete device-level diagnostics for easy network maintenance .

Allowed to casually throwing things down from the car.

(14) limit switches and interlock protection device should always check.
(15) is not permitted to touch the limit switch as a parking solution.
(16) lifting the brake problem, you can not lift heavy objects.
(17) was hanging objects are not allowed to run over the people or equipment.
(18) When welding unit of the crane, to specifically set the ground, do not allow the use of body ground.
(19) hooks in the lower limit position, the roll must retain the safety loops more turns.
(20)Hand Pallet Truck not collide with each other, but does not allow the use of a crane to push another crane to work.
(21) lifting heavy objects, liquid metal, explosive and dangerous goods, you must first slowly lifting from the ground 100 ~ 200mm, trial brake reliability.
(22) repair and inspection of the lighting, the voltage must be 36V or less.
(23) Overhead Crane all electrical equipment enclosure should be grounded. If the car is not welded to the main beam track should be taken when welding ground measures. Ground wire cross-sectional area greater than 75mm2 available galvanized flat iron or bare copper or greater than 10mm2 30mm2 galvanized round. Cab or crane body ground position should be more than two. Any point on the crane to the power between the neutral point grounding resistance should be less than 4Ω.
(24) to have regular safety technical inspection, good pre-preparatory work.

Bridge girder structure type more typical are

Bridge operating agencies
The metal structure of the bridge
From the main beam and side beams, divided into single girder and double girder bridge bridge categories. Single girder bridge by a single span girders and located on both sides of the end beam omposed of two dual-beam bridge girders and by the end beam components. Main beam and side beams rigidly connected to the wheels at both ends with end beam for supporting the run on the elevated bridge. Main beam welded rails for lifting trolley. Bridge girder structure type more typical are:
1 box-shaped structure
(1) track box-shaped double beam is widely used in a basic form, the main beam from the upper and lower flange plates and sides of the vertical web composition, trolley rails arranged on the flange plate on the center line, and its simple structure, easy to manufacture, suitable for mass production, but the larger self.
(2) Partial rail box double side rail box girder and single girder cross-section are from the upper and lower flange plates and unequal thickness of primary and secondary webs composition, Hand Pallet Truck rails arranged in the main webs top box Short body stiffener save where partial rail box girder by a single wide-flange box girder instead of two main beams, weight smaller, but more complex manufacturing.
2 four truss structure
The four combined into a closed space plane truss structure, the upper surface of the horizontal truss generally paved walkway plates, light weight, stiffness, but compared with other structures, size large, more complex manufacturing, fatigue strength is low, has been less production.
3 TRUSS [1]
Similar to the off-track box girder by four steel plates form a closed structure, in addition to the primary web is a real belly-shaped beam, the other three steel plates in accordance with the design requirements into many windows, forming a non-fasting truss diagonals in the upper and lower horizontal truss paved walking platen surface, cranes operating agencies and electrical equipment installed in the tray inside, lighter weight, the overall stiffness, which is more widely used in China as a pattern.

Introduction and types of cranes

Posted by: admin Read 237 times Published: October 11, 2012 Print This Page
Crane rental Hand Pallet Truck large crane lifting Jiangmen Jiangmen crane rental
European crane use common concepts depicted with scales small, light weight, small wheel pressure characteristics. Compared with conventional cranes, hook to the limit of the wall spacing minimum headroom minimum, Keli crane more jobs near the front, lifting height higher practice increases the existing plant useful work space. Because the crane is light weight, small wheel pressure characteristics, the new plant can be depicted in a smaller space, function more fully. Means the initial establishment of a smaller plant funded and long heating, air conditioning and other protective fees can save a substantial amount of money.
Usually by a crane lifting arrangement (the items up and down movement), operating arrangement (the lifting move), horn arrangements and reverse arrangement (the article for horizontal move), plus metal arrangements, power equipment, operating rigging and equipment necessary adjuvant combination. Attachment: Cranes in the study can be seen as a physical hard lever!
Bridge engineering used in lifting machinery, based on their structure and function is not the same, usually divided into small light lifting equipment, overhead type crane and jib type crane three categories. Small light lifting equipment such as: jacks, pneumatic hoists, electric hoists, balancing hoists (also known as balance suspended), winches, etc.. Girder bridge type lifting machinery such as cranes, gantry cranes. Fixed jib type crane, such as reverse cranes, tower cranes, truck cranes, truck cranes, crawler cranes. Must be promoted in the range of straight and horizontal transfer of many initiatives to lifting heavy objects. Also known as the crane. Attributed to material transfer machinery. Crane operation is characterized by intermittent exercise to do,

Hand truck maintenance has trick

As we all know, everything is to go through in order to make it last longer care, hand truck is no exception, proper maintenance and repair will make it look like new, but there are too many people are not aware of this one o'clock that directly after a few years of retirement is no longer used. Here are some manual Hand Pallet Truck car maintenance tips, were manifested in the daily maintenance, regular inspection and timely dry cleaning, always check van steering and so on. Manual handling car of good quality, but do not underestimate these routine maintenance, will be the long-term accumulated a small fortune fortune, at least your truck can extend the life of many years.
In the manual handling routine maintenance on the car, we have to work every time after appropriate checks, check it out what the fault is not in the end. The next step is to find it when you appear on the surface peeling paint and surface corrosion occurs, then it will be painted, the paint again, the effect is an order to protect its surface. Regular maintenance is also every staff member must do, if you find steering problems, we will promptly replace the steering gear, it can work.
In fact, hand truck maintenance trick, there are many, each of us has their own set of methods, or can be summed up to share with everyone, and everyone together to exchange and learning will find endless benefits. In short, summed up in one sentence: that timely maintenance is the only way to extend the life.

Electric forklift heyday coming

2012 Theme Exhibition Logistics Exhibition forklift bring people different visual shock, electric forklifts have started telling people from the behind the stage, to get rid of the outerwear accessories become the protagonist, it also shows that China now electric forklift market has matured, and the demand for high, formed a certain pattern. The internal combustion forklifts due to overcapacity, homogeneous competition intensified, resulting in declining market situation, and the internal combustion forklifts no longer meet current environmental requirements.
2008 China's electric forklift by the impact of the financial crisis after there was a small decline, rebounded to 2011, almost at the speed of growth, but the impact of the European debt crisis and China's domestic economy downturn, in 2012 sales amount obviously saw a decline, but some experts are expected in recent months there will be a small increase, overall truck sales are still declining trend appears to 2014 return to a rational growth period, after which there will be a substantial growth. At this stage there will be a series of the industry reshuffle, mergers and acquisitions wave, there will be a professional electric forklift truck new entrants into the market. Hand Pallet Truck will not have much growth, even slowly exit the market.
When the electric forklift enters heyday occur when practitioners follow the trend of the phenomenon, which is the Chinese entrepreneurs these years of investment style, the future will be the emergence of a large number of manufacturers, or even appear across the industry manufacturers. Emerging manufacturers gave birth to some extent, electric forklift rapidly maturing market and promote their sales rise; also inevitably exist disorderly competition, homogeneity, low-price competition will once again disrupt the market, undermining competitive environment, once again staged from the manufacturer to the coexistence of profit loss, shuffle phenomenon. How to victory in this war it? Victory of expression is to occupy a larger market share, so the market positioning and strategy is essential. Now most people's consumption concept appeared to change, not just blindly pursue low prices, the more it is concerned about the brand, service, so the future is not to win the market price, but the brand

Exhibitors range of good

2012 China (Shenzhen) International Truck and Hand Pallet Truck, transmission equipment exhibition will be held in Shenzhen Convention and Exhibition Center
2012 年 October 15 to October 17 in Shenzhen Convention and Exhibition Center 2012 China (Shenzhen) International truck as well as handling, transport equipment exhibition, the exhibition of "low-carbon green technology-driven industrial upgrading" as the theme.
In recent years, global warming, extreme weather, melting of glaciers and a series of climate issues, the U.S. subprime mortgage crisis and the emergence of the European debt crisis directly affects global economic change, in order to take the road of sustainable development, the global economy began to change, the development of green, low-carbon, environmentally friendly economy. One of the top ten industrial revitalization of the logistics industry, logistics and energy saving technology innovation is particularly important.
Exhibitors range of goods:
Forklift exhibition: electric pallet trucks, order pickers high, internal combustion forklifts, electric forklifts, and more to go forklifts, electric pallet trucks, side loader, empty container forklift, tractor, fixed platform truck, battery forklifts, explosion-proof forklift, container forklift, container reach stackers, reach trucks, hand pallet truck, general handling forklift, hand truck, mine truck, telescopic forklift fork laneway, military terrain forklift, container forklift liquefied petroleum , low pickers, heavy container forklift operation, narrow aisle forklifts, shelving, etc. with a fork.
Transmission equipment exhibition: chain conveyors, belt conveyors, roller conveyors, chain conveyors, screw conveyors, pneumatic conveyors, vacuum conveyors, scraper conveyors, three-dimensional conveyor, bucket elevator, vibrating conveyors, conveyor accessories.
Handling equipment exhibition: rail transport vehicles, crawler crane, hoist, Ramps, explosion-proof cranes, jib crane cranes, bridge cranes, gantry cranes, vans, tire cranes, rail cranes, tower cranes, crane accessories , refrigerated refrigerated trucks, container trucks, cranes, special industrial trucks, warehousing and can be retrieved for industrial trucks, GPS positioning systems, various port special vehicles.
Transport equipment exhibition: City buses, road passenger and freight transport vehicles, vessels and marine equipment, vehicles parts.
Forklift accessories and attachments exhibition: forward fork, battery and charging system, electrical lighting systems, Bale, power systems, drive systems, steering systems, hydraulic systems, tipping fork, carton clamp, lifting systems, body systems, seat mast system, transmission, electrical system, cooling system, battery, hydraulic oil, multi-use pallet forks, car tires casters, fork, hose reel, pitch fork, push-pull, fork clamp, dual-fork clamp , lateral fork, brick carriers, trays, operating system, no arm clip, telescopic forks, round bar clamp, barrel clamp, load stabilizer roll holder, multi-arm clip, rotating fork, rotator, professional lubrication oil.
Other: Forklift related equipment, testing equipment, tools and so on.

Electric Pallet Truck

Electric pallet truck with motor drive, for horizontal transport and cargo handling, generally pedestrian and ride-two operation modes can be selected according to efficiency requirements for applications requiring high efficiency.
BUOMU (Bangmu) electric pallet trucks are divided into two kinds of all-electric and semi-electric models, full electric pallet truck is power walking, electric elevated forks; semi-electric and electric truck to go hand raised forks.
1.5 to 2.0 tons carrying capacity, operating channel width is generally 2.3 to 2.8 m, forks 200mm lift height is generally left
Hand Pallet Truck hydraulic lift pump option in Italian Pu original pumping station, cargo movements more smoothly;
Italy imported Marotta drive wheel disc brake system configuration reliable, powerful, stable performance;
America imported Curtis electric control system, responsive to operate freely;
Imported operating handle, pull handle in a 45-degree angle before work hand in the middle of the red belly switch as a safety protection device, as long as the horn belly hit the switch body, Stacker will be full speed ahead, to prevent crushing people;
Elevated scissor Electric pallet jack
Elevated scissor truck van and platform is the combination of vehicles, in achieving the level of handling while providing a lifting platform features, mainly applied to lines, conveyors and unloading of goods stacked position adjustable workbench.
BUOMU (Bangmu) elevated scissor truck into manual, electric two kinds, the user can according to different conditions needs to choose the most suitable model.
0.5 to 1.5 tons carrying capacity, lifting height of up to 800mm, 420mm height when fork raised, the front wheel and adjustable stabilizer legs extends automatically snapping up ground braking effect become fixed platform to ensure optimum stability and optimum braking performance.

Stacker works detailed manual forklift Information Technology [support]

Manual forklifts, manual stacker, stacker basic structure consists of hydraulic mechanism, electric control mechanism, the support mechanism composed of a lifting device. Hydraulic oil from the a spring-loaded plunger a certain pressure, the filter, the lower end of balancing valve into the cylinder, the Hand Pallet Truck cylinder piston upward movement, heavy lifting, and so on, and to work.
     1, manual hydraulic stacker 1000kg vehicle weight divided to 3000kg, elevated up to 2000mm can also be customized according to user requirements,
     2, manual hydraulic forklift truck is widely used in industrial and mining logistics and warehousing sites. Reliable quality and perfect performance.
     3, the user can choose according to their use of dynamic mode and configuration:
     ① Power system: Battery DC power supply, battery AC power supply.
     ② walking: assisted self-propelled, self-drive type,
     ③ Leg: Wide leg,
     ④ control system: control systems.
     ⑤ pump station: U.S. imports pumping station
Second, use
     Hydraulic stacker, electric stacker, semi-electrics tacker stacker widely used in automobiles, containers, mold manufacturing, wood processing, chemical filling and other industrial enterprises and production lines to meet the needs of different jobs stacking height, with lifting smooth and accurate, frequent start, carrying capacity and other characteristics, an effective solution to various industrial enterprises in difficulty lifting operation, ease of production operations.
     Mainly through the pressure of the hydraulic oil lifting gear in order to achieve the function, high stability, high load capacity stacker stack heap using not only the goods but also in some places it is used to make high-altitude operations, said he was fit the industry is frequent. Stacker is a modern good helper.

The truck has a strong profitability and lower barriers to entry also attracted

With the development of market economy, logistics and technology in economic development, the status and role more and more obvious, forklifts increasingly high penetration rate, from the past, a single port terminal for use in all walks of life into the national economy, the market potential is huge . The truck has a strong profitability and lower barriers to entry also attracted other industries and enterprises to join.
At the national policy of stimulating domestic demand, supported by the majority of enterprises to adopt structural adjustment, strengthen the competitiveness of advantageous industries, developing domestic and foreign markets, prompting heavy machinery industry managed to maintain steady and rapid growth. For example: Hebei earthworm warehouse Hand Pallet Truck equipment Manufacturing Co., Ltd. since 2005 engaged in warehousing and logistics equipment design, manufacture, installation and logistics planning programs work in the company's development process, has been pursuing a "technology-led" principle, culture technology innovation team, developed with leading storage products and automated logistics systems. Hebei earthworm in the production and sale of machinery and equipment market practice, it is also developed its own high-quality products - Shaped truck. On the one hand to meet customer demand for special cargo handling, it also increases their competitiveness in the market. Earthworm business came step by step, has withstood the test of the market and customers, to the market, but also give yourself to produce a perfect answer.
It is undeniable that Hebei's development is inseparable from the dragon machinery market environment, and promote prosperity increasingly the main camp forklift or because the domestic market is not saturated, there are many companies like Hebei Dragon of machinery, like to seize the opportunity. But industry experts said that although the market situation has improved, the truck market is still very fragile environment, customer requirements for product quality will be higher. With the further improvement of the truck market, domestic forklift industry in turn set off a "quality" as the theme of the competition.

About electric truck battery operation and maintenance of electric transmission Introduction

December 27, 2011 Read 1959 times Tags: Electric Pallet Truck Pallet Truck Full Electric Pallet Truck
Summary: electric truck battery replacement operation an electric pallet truck replacement battery must be the same type; 2 Remove the battery screws; 3, remove the cables from the battery terminals; 4, slide out or hanging out the battery; 5, according to the inverse process indicated above the battery, tighten and properly connected.
Electric truck battery replacement operation
An electric pallet truck replacement battery must be of the same type;
2 Remove the battery screws;
3, remove the cables from the battery terminals;
4, slide out or hanging out the battery;
5, according to the inverse process indicated above the battery, tighten and properly connected.
Hand Pallet Truck battery end of life operations
1, the end-of-life battery operation: When the battery near the end of life, single cell battery electrolyte abate very quickly, you should add distilled water every day;
2, treatment of waste batteries: For waste batteries, taking electrolyte, the battery exploded. Can be discussed whether the battery manufacturer recycled.
Electric truck electric control system functions
Electric Pallet Truck features electric control system is the core part of the electronic control system, mainly used to control electric truck following functions:
An electric van walking include: forward, backward, turn;
2, the electric truck fork lift, lower, tilt and sway.
Electric Pallet Truck Transmission Maintenance
1, cleaning gear boxes and change gear oil;
2, cleaning rotating bearings, bearings and add oil;
3, check and adjust the brake system and joint activities with butter;
4, check Electric Pallet Truck automatic gearbox system for automatic gearbox and replacing the filter;

Drum truck classification

DT350A hydraulic bucket Hand Pallet Truck
Bucket truck, the company operating the bucket truck operation is simple, easy to use, we adhere to the "quality first, users of" the quality policy of "quality to expand the market, to management for efficiency", the user's satisfaction as our highest pursuit, this is my company in the fierce competition in the market continue to maintain market share in the key.
Drum truck classification
According to the characteristics of a bucket truck bucket truck can be divided into:
Bucket truck, hydraulic bucket truck, hydraulic bucket truck, bucket truck with a known type, barrel handling folder.consider selecting horizontal, vertical, and other types (pipeline, angled, variable angle type, angle type, parallel, vertical, vertical, submersible, will be demolished, liquid-type, no plug-in, self-priming, gear type, oil-filled, filling water type).
3, according to the nature of the liquid medium to determine the water pump, heat pumps also pumps, chemical pumps or Naifushibeng or trash pump, or using non-clog pump.
Pump installed in the blast area should be based on regional level explosion, explosion-proof motors.

Overload voice alarm installed to distinguish overloaded or equipment failure.

Hydraulic lifting platform is mainly through the pressure of the hydraulic oil lifting gear in order to achieve the function, its scissor mechanical structure, the lift platform lift has a high stability, large platform and a high load carrying capacity, so that high-altitude operations greater range, and for many people simultaneously. It makes high-altitude operations more efficient, safer and more protected.
Hydraulic lifting platform works
Hydraulic oil from the vane pump a certain pressure, the oil filter, explosion-proof solenoid valve, throttle valve, check valve, balance valve into the lower end of the hydraulic cylinder, the piston of the Hand Pallet Truck cylinder upward movement, improve weight material, hydraulic cylinder top of the oil by flameproof solenoid valve back to the tank, the rated pressure through the relief valve is adjusted by means of pressure gauge observe the pressure gauge readings. (Recommended lifting platform Safety Precautions)
Downward movement of the piston cylinder (both decreased weight). Hydraulic oil by explosion-proof solenoid valve into the cylinder upper end of the lower back to the oil through hydraulic cylinder balancing valve, check valve, throttle valve, explosion-proof solenoid valve back to the tank. In order to decrease the weight stable, safe and reliable braking, balancing valves in the return line settings, balance circuit, keeping pressure on the rate of decline from the weight change, the throttle valve to regulate the flow control lifting speed. To make safe and reliable braking to prevent accidents and enhance pilot-operated check valve, namely hydraulic lock, ensure that unexpected burst of hydraulic lines can be safely self-locking. Overload voice alarm installed to distinguish overloaded or equipment failure.
Use
Hydraulic lifting platform widely used in automobiles, containers, moldmanufacturing, wood processing, chemical filling and other industrial enterprises and production lines to meet the different needs of working height of lift, and can be equipped with various types of countertops forms (such as balls, rollers, turntable, turn, tilt, telescopic), with a variety of control methods (sub-action, interaction, explosion-proof), with a smooth and accurate movements, frequent start, carrying capacity and other characteristics, an effective solution to various industrial enterprises in difficulty lifting operation, so that production operations easier.

this is the future traditional industry trends.

As China's market, the most veteran of the storage equipment manufacturers, Dalong products work consistently superb. Unfortunately, marketing and sales channels weakness led to the "Dalong" brand audience is small and development of new products seem to keep up with the pace of a few other giants. So after all of its 40 years of brand history failed to achieve rapid development.
Reserve Force as warehousing industry the new army, as have "resistant" team of the team, as tens of millions of investment in warehousing greet new army, reserve force production capacity and technology instantly leapt to the industry-leading, as well as many companies provide OEM services also boosted its sales.
Make workers work order may not be big brand awareness, which is attributed to their unusual sales and marketing mode. Growing on the Internet now, and make innovative use of the Internet work for online marketing, combined with line experience in shop mode, allowed performance products back to the customer's hands can do as much as possible sales prices low, this is the future traditional industry trends.
Zhuo a Suzhou Pioneer Material Hand Pallet Truck Equipment Co., Ltd. has accumulated more than ten years experience in production and sales of storage equipment, performance of their products in the domestic industry is also remarkable. Meanwhile, the channel mechanism in these years to develop, National Distribution volume has steadily improved, which would also greatly contributed to the sales growth. Is the domestic first-line stacker manufacturers.
Niu Niu Li Machinery has a long line of products, Stacker is not their very advantage. However, in view of its strong brand recognition and prosperity of the country and the two branches of the many distributors, coupled with the price of low-end positioning, making cattle force Stacker products in the market also has a certain scale holdings.

Forklift role in logistics

Trucks at ports, railway stations, airports, warehouses, supermarkets, printing, paper system has a wide range of uses, can be improved, stacking, loading and unloading cargo into pieces or parts. Proof forklift which is mainly used for the existence of explosive gas mixtures in dangerous places, used for loading and unloading, handling, stacking and other operations. Such as: petroleum, chemical, textile, pharmaceutical, food, defense and other industrial sectors.

A warehouse area is small, when the goods more

   If the warehouse smaller, higher altitude, and requires a lot of storage capacity and higher transport efficiency when you do not want to spend a huge investment in automated warehouse, then stacking machine is unique is the best choice.

  Reach Forklift most electric stacker operating height of 6-8 meters, equivalent to building height of 10 meters, electric forklifts, this height is currently the most common stores, distribution centers, logistics centers, business centers warehouse building height, in the pharmaceutical industry, electrical and electronic industries in general.

2, Outdoor frequent short distance from the transport

  Diesel and LPG forklift trucks are also two kinds of different ways according to the transmission, outdoors travel frequently between short haulage hydrostatic transmission type used when significantly improve the efficiency of internal combustion forklifts.

3, Outdoor handling

  Often referred to as the counterbalance forklift trucks, which is the most widely used, the largest amount of a series. Commonly used for loading and unloading and outdoor haulage.

4, small warehouses

  Electric Stacker relatively lightweight body through the front section of the support arm extended arm counterweight to balance the load, is a small warehouse economical choice.

5, or third-party logistics warehouse distribution center

  Elevated Master Stacker can be divided into two kinds of style and not Exalted, because the operator can reach any location of goods shelves, it can be used for both picking and inventory operations. Picking car series at the distribution centers and warehouses are widely used.

   Hand pallet trucks and electric pallet truck features and application of environmental

    When the plane Hand Pallet Truck distance of 30 meters, the electric pedestrian pallet truck is the best choice, speed through the switch on the handle infinitely variable speed control, follow the walking speed of the operator, at the same time reducing personnel fatigue, to ensure safe operation. Such as major transport routes in the 30-70 m distance around, you can use the pedal with a folding electric pallet truck, driver standing driving, maximum speed can be increased by nearly 60%.

    Hand pallet truck and electric pallet trucks are used to transport plane point tool. Small, flexible body makes hand pallet trucks suitable for almost any occasion. However, due to a manual operation, when about 2 tons haulage heavy items when more difficult, it is usually used for short distances of about 15 meters frequent operations, especially loading and unloading zone. Various aspects of logistics in the future, the manual pallet trucks will also assume the interface between the various aspects of the role of transport in each set of cards or a truck is equipped with a hand pallet trucks, will make quicker and more convenient loading and unloading operations, and does not subject to site constraints.