2014年6月25日星期三

Speaking of the functional role of such a Scissor Pallet Truck then for its function


Electric Stacker as a mechanical device, of course it can achieve more efficient work, so that our work can be carried out quickly.

Speaking of the functional role of such a powerful electric forklift trucks then for its function, it in turn can be used to determine which areas of it? This is not just a user needs to know, but also electric stacker a buyer should know, after all built on the basis of knowledge or understanding can bring more benefits to us.

The first is a warehouse, in order to achieve efficient use of warehouse space, our most basic need items are stacked together, but the distance is too high, and the height of merely relying on artificially forces still can not be achieved, so we need is an electric Electric hydraulic stacker to complete this work.

Followed in the workshop, the workshop of the goods piled also has certain requirements, so in fact it will be like the same demand in the warehouse, so at this time the use of electric forklift trucks are also able to play a very active role in .

Electric Stacker from the point of view of applications, we know that it is mainly used for goods piled high work, but it can still play a very active role in the respective fields, so its use is also to It brings a lot of positive role.

2014年6月21日星期六

Scissor Pallet Truck high efficiency, high levels of intelligent control machine.


Ordinary domestic electric forklift technical performance is generally low, if carried out on the basis of proof design, can certainly not a good proof machine performance, and explosion-proof modification machine technology

Performance will be reduced, so the design must first refer to the new technology to improve electric forklift technology level, but also innovative design ideas to design Scissor Pallet  Counter-balance Stacker  more in line with explosion-proof characteristics of the system, so that low-current, low temperature rise, low noise, high efficiency, high levels of intelligent control machine.

b) active and passive explosion protection technology designed to combine the means

General domestic electric explosion proof forklift design commonly used technique is to take flameproof, intrinsically electric riding pallet jack safe, increased safety and other means to prevent or control the occurrence of an explosion after explosion proof body, but also in

Try simple circuit design, reduce lines and reduce spark control points on the line aging, insulation performance by artificial periodic inspection, greater security risks

2014年6月19日星期四

Scissor Pallet Truck so as not to affect the normal operation of the hydraulic system.


Manual hydraulic pallet trucks, also known as manual forklift to load when using fork inserted into the tray hole driven by a hydraulic system to achieve human cargo tray lifting and lowering, pulling completed by human handling operations. It is the most convenient means Electric lifters of transport pallets, most effective, the most common loading and unloading, handling tools.
1, should be based on different environments, use different operating oil. When the ambient temperature is -5 ~ +45' C, please use the mirror synthetic oil, add the oil must be clean, so as not to affect the normal operation of the hydraulic system.
2, the structure of the ministries should be checked before use is normal, all joints is loose.
3, the goods should be uniformly electric pallet trucks distributed in the surface of the fork not tilt or a single crossed up, after the accident to prevent tipping or goods damaged parts.
4, after the operation, should be unloaded and placed in a low position of the car, will not allow heavy objects on a long fork.
5, during transport van, probably due to inversion causes the hydraulic system into the air, resulting in a slow lifting rod or pressure is less than the job requirements. Under no circumstances should the load, put the car in a low position, but pulled grapple, reciprocating several times to return to normal.

2014年6月16日星期一

Scissor Pallet Truck Wear a gap between the stem and the body is too large



Manual Forklift  Stacker due to long-term use or distribution valve dirty oil to speed up the stem and the body, such as wear and tear, with the destruction of the sealing surface, causing oil spills. If the repair stem wear lighter, can stem polished chrome; If the stem badly worn, replace
2, leakage between the valve body
electric reach stackers cylinder seal failure, resulting in leakage; valve performance when installing injury or aging or damaged O-rings in the hydraulic effect, but also prone to leakage between the valve body.
If you need to be polished valve damage, replace the O-ring, according to the order and tighten the bolt torque requirements.
3, the valve spring failure
If the valve spring failure, hand pallet trucks oil under pressure can be forced below the system requirement to leave the ball spill valve inflow tract, causing the leak, the system failure.
Spring must be replaced when the manager, and then use the adjustment screw to adjust the spring pressure 14 Mpa regulations. On demand from the load center at 600mm load adjustment 7.5t goods when the goods like starting with a non-locking nut from the lock, then the pressure is the need to adjust the pressure.



2014年6月3日星期二

the control part - used to control and regulate the oil pressure, flow and flow direction.


Hand Pallet Truck with oil as the working medium , to pass the motion by changing the volume of the seal to transmit power through the oil pressure inside .

1, the dynamic part - the original motivation of the mechanical energy is converted to oil pressure energy .

2 , the operative part - the oil pressure pump input energy into mechanical energy to drive the work of agencies.

3, the control part - used to control and regulate the oil pressure, flow and flow direction.

4 , the auxiliary section - the first electric pallet jacks three parts are connected together to form a system from oil storage , filtering , measuring and sealing effect.

Pressure in a volume of liquid at any point on the applied equal size can be transmitted to all directions. This means that when using a plurality of hydraulic cylinders , each of the speed of each cylinder will be pulled or pushed , the speed of which depends at electric pallet jack the pressure required to move the load .

At the same carrying capacity of the hydraulic cylinder , the hydraulic cylinder bearing the minimum load will be moved first , the maximum load bearing end of the cylinder to move .

To synchronize the movement of the hydraulic cylinder , the load at any point in order to achieve the same speed is lifting, be sure to use a control valve in the system or synchronous lifting system components.