2016年2月29日星期一

platform stacker

When operating the platform stacker always face the direction of travel, do not walk backwards.An electric pallet jack should never be operated on a ramp.
The red button on the operation handle is an emergency reverse. This button will prevent the electric Post lift tables from running you over.The electric pallet jack, with a full load, can weigh as much as a car

2016年2月15日星期一

Carriage

  • Carriage - is the component to which the forks or other attachments mount. It is mounted into and moves up and down the mast rails by means of chains or by being directly attached to the electric pallet trucks cylinder. Like the mast, the carriage may have either rollers or bushings to guide it in the interlocking mast rails
  • Load back rest - is a rack-like extension that is either bolted or welded to the carriage in order to prevent the load from shifting backward when the hand truck dolly is lifted to full height

2016年2月10日星期三

Mast

Electric lifters is the vertical assembly that does the work of raising and lowering the load. It is made up of interlocking rails that also provide lateral stability. The interlocking rails may either have rollers or bushings as guides. The mast is driven hydraulically, and operated by one or more hydraulic cylinders directly or using chains from the cylinder/s. It may be mounted to the front axle or the frame of the forklift. A 'container mast' variation allows the forks to raise a few meters without increasing the total height of the forklift. This is useful when double-loading pallet truck power into a container or under a mezzanine floor

2016年2月5日星期五

forward to assist in engaging a load

The cab area may be open air or enclosed but it is covered by the Electric order picker overhead guard assembly. When enclosed, the cab may also be equipped with a cab heater for cold climate countries along with a fan or air conditioning for hot weather.
Overhead guard - is a metal roof supported by posts at each corner of the cab that helps protect the operator from any falling objects. On some forklifts, the overhead guard is an integrated part of the frame assembly.
Power source - may consist of an internal combustion engine that can be powered by LP gas, CNG, gasoline or diesel fuel. Electric forklifts are powered by either a battery or fuel cells that provides power to the electric motors. Reach fork trucks used on a forklift may be either DC or AC types.
Tilt cylinders - are hydraulic cylinders that are mounted to the truck frame and the mast. The tilt cylinders pivot the mast backward or forward to assist in engaging a load.