2015年3月10日星期二

drum truck Industry needs models and configurations.

Select models
1. Vehicle Classification
Forklift usually be divided into three categories: internal combustion forklifts, electric forklifts and warehouse trucks.
(1) internal combustion forklifts
Internal combustion forklifts are divided into Manual stacker ordinary internal combustion forklifts, heavy trucks, container trucks and sides of the truck.
① ordinary internal combustion forklifts
Generally use diesel, petrol, LPG or natural gas engine as power, load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise problems, usually outdoors, workshop or other for exhaust emissions and noise do not require special places. Due to convenient refueling, it can achieve long continuous operation, and competent (such as rain) to work in harsh environments.
② Forklift Trucks
A diesel engine as power, load capacity from 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor jobs.
③ Container Handler
A diesel engine as power, load capacity from 8.0 to electric riding pallet jack 45.0 tons, is generally divided into empty forklift, heavy container forklift and reachstacker. Applied to container handling, such as container yard or port terminal operations.
④ Sideloader
A diesel engine as power, load capacity of 3.0 to 6.0 tons. Without turning, with the ability to take the goods directly from the side of the fork, and therefore mainly used fork to take a long bar goods, such as wood, steel and so on.
(2) electric forklift
Electric motor powered, battery energy. Carrying capacity of 1.0 to 4.8 tons, the operating channel width is generally 3.5 to 5.0 m. Since there is no pollution, noise, it is widely used for environmental demanding conditions, such as medicine, food and other industries. Since each cell is generally about eight hours liftstar electric pallet trucks at work needs to be charged, so for multi-shift working condition with battery backup.

2015年3月7日星期六

liftstar Scissor Pallet Truck warehouse forklift

Warehouse forklift mainly for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as manual pallet truck) is the use of human-driven, others are driven by an electric motor, because the body is compact, mobile and flexible, light weight and good environmental performance Hand lifter and have been widely used in the storage industry. When multi-shift operation, the motor-driven warehouse forklift battery backup needed.
① Electric Pallet Truck
Carrying capacity of 1.6 to 3.0 tons, the operating channel width is generally 2.3 to 2.8 m, fork lift height is generally around 210mm, mainly for horizontal transport and cargo handling within the warehouse. Generally there is a walk-and Stand-two operation modes, can choose according to efficiency requirements.
② electric pallet stacker forklifts
Carrying capacity of 1.0 to 1.6 tons, the operating channel width is generally 2.3 to 2.8 m, in the structure of the door frame more than electric pallet trucks, fork lift height is generally within 4.8 Drum Truck meters, mainly for cargo warehouse stacking and loading and unloading.
③ reach truck
Carrying capacity of 1.0 to 2.5 tons, the whole door frame can be moved forward or retracted retracted operating channel width is generally 2.7 to 3.2 m, lifting height up to about 11 meters, commonly used in the warehouse of medium height stacking, taking cargo operations.
④ electric pickers
In certain conditions (such as supermarket distribution centers), does not require a whole pallet shipments, but in accordance with the order picking up a variety of species of cargo pallets, this link is called picking. Chosen according to the height of the goods, electric order pickers pickers can be divided into low (within 2.5 m) and the high order pickers (up to 10 m).
Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in high, with cab upgrade).
⑤ low driving three stacking forklift
Usually equipped with a three-stacking head, do not need to turn the truck, fork rotation can be achieved and pick up the goods stacked on both sides of the channel width of 1.5 to 2.0 m, lifting height of up to 12 meters. Truck cab can not always upgrade on the ground, taking into account the limitations of the operative field, mainly for lifting height of less than six meters working conditions.
⑥ three high stacking forklift driver
And low driving similar three-stacking forklift, driving three Manual stacker high stacking forklift is also equipped with a width of 1.5 to 2.0 m three stacking head, channel, lifting height of up to 14.5 meters. Its cab can be improved, the driver can clearly observe any height goods can also be picking operations. Three high stacking forklift driver in a variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has been gradually replace the low three-stacking forklift driver.
⑦ electric tractor
Using a motor-driven tractor, with its towing capacity (3.0 to 25 tons), followed by pulling a few car loading cargo. Often used for transportation between the workshop or workshops bulk goods, such as automobile manufacturing warehouse to the assembly line of transportation, airport baggage.

2015年3月4日星期三

shop crane Note the use of pressure maintenance and truck scales

, the problems of interpretation:
1, place heavy objects not too far before (ie two tines tip section)
2, field calibration weights low quality
3, truck use the right way, try not to weigh in on the move
4, does not exclude transport, Drum Truck squeeze, drag a heavy object, secretly calibration possible
5. ban the barbaric use
Two measures:
A re-calibration
① weight greater than 1T, less than 2T (1.5T calibration)
② forklift raised about 2cm calibration
③ placement in the middle of the table after partial (handle section)
2, was called before the weight can not be partial, that can not go beyond the front end of two head position sensors, such as pallets, pallet tines must not exceed
3, as well as weighing error:
Methods ①: The truck rose to the highest, Hydraulic fixed lift table with a piece of paper inserted into the scales cover the four sides of the fork gap paddling around to see if there are places on the list, if the problem can be a suitable tool by Alice from
Method ②: raise tines cover, loosen the sensor retainer, with a large flathead screwdriver to adjust upwards, and then loaded on retainer can be. If there is no adjustment screw on the sensor, you can then remove the tines loosen the retainer cap, then the cap under the four screws in 2-3 turns can be.
Methods ③: Check to see whether the touch retainer rod, such as touch directly remove the retainer, try scales once, if not installed removable retainer useful.
Truck, hand pallet trucks, forklift trucks, manual hydraulic Hand lifter stacker, hydraulic truck scales, hydraulic forklift, said hydraulic pallet truck scales.

2015年3月1日星期日

drum truck Forklift Battery safe use and maintenance of the six points

A routine inspection
     1, the liquid level: below the rated level, will shorten battery life, and too little will result in the battery electrolyte heat damage, therefore, must always pay attention to the adequacy of the electrolytic solution.
     2, terminal, wire, cover: You must always check the Hand stacker battery terminal junction, and the connection wires caused by oxidation due to corrosion, and check whether the deformation of the lid, is there fever phenomenon.
     3. Appearance: battery dirty surface will cause leakage, so that the battery surface should be ready to clean and dry.
     Second, the maintenance
     1, add water: according to the level specified in distilled water, do not add water to prolong the interval and add too much distilled water, add too much water will overflow cause electrolyte leakage.
     2, charging: the battery charging process will produce gas, the charge should be kept ventilated place, no fire around, while charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging unplug the charger plug arcing, after charging the machine turned off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover on Hydraulic fixed lift table the battery charge.
     3, terminal, wire, cover maintenance: must be specified by the manufacturer of professional and technical personnel are available.
     4. Clean: If dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally.
     Third, custody
     1. Storage place: You can not make a short circuit; cause a short circuit may occur due to rain fire and may produce a small amount of hydrogen, the battery must be stored in a ventilated, cool place.
     2, scrap batteries: waste battery power is still there, Drum Truck should be kept in accordance with the methods used to store 
batteries.