2015年6月30日星期二

How to do a forklift bearing lubrication?

The new lift star truck or hydraulic hand truck stop working long after, within two weeks at the beginning of use, should be lubricated bearings for when lubrication should take advantage of all the new oil out of the old oil and lubrication for more than two, and should pay attention to The following points.
1, should be removed before lubricating oil cap, oil drain plug and nozzle above the dirt, so dirt falling into the house.
2, with a grease gun lubricant injection pressure, injection pressure to be part of the components of the extrusion lubricant combination so far.
3, in summer or winter seasonal lubricant should be replaced

2015年6月25日星期四

The development of technology innovation Stacker industry remains essential

Electric Stacker has now become the most dazzling star of industrial vehicles, various manufacturers are targeting such a large market development, as the market for electric forklift trucks strong demand, the development of electric forklift trucks are gradually accelerated, the problem also continued with appear.
This time, some industry experts for electric forklift jacks industry summarized the problems, the lack of innovation is an important issue for the industry.
Although today's forklift trucks industry, whether it is quality or safety or cheap sex on both improved a lot, but there is still some room for development. It is precisely because many companies feel that the Stacker products have met the needs, so they feel Stacker aspects do not need to be innovated. In particular, some small manufacturers, the ability to innovate even worse, can only mimic other big brands products exist, but you know, no innovative products or companies are not far away, but now many are also before the product innovation It is considered to be a good product, and an upgrade of their products is a law.
The main business of the lack of innovation for two reasons, one is innovation and investment, high cost, and the other could not find the breakthrough. In this regard the cost of innovation is indeed innovative industrial products only in research and development costs have a great cost. For this problem, the government should give attention to the production of innovative technology companies to financial support, so that enterprises in electric hand jack innovation performance above may be no worries. Faced with the strength and innovation of foreign brands, domestic enterprises still have a long-term way to go.
Product innovation is not to say arbitrary angle to find an innovation, it must be bonded to the market demand and product defects inherent to innovation. If you say that the Stacker what flaws, I believe a lot of people did not. But do not you know there is a difference between electric forklift trucks and other forklift trucks, which also represent these differences, there are some drawbacks and advantages. So, the more is one of the advantages of integrating innovative content, we would like to see more domestic enterprises to show more enthusiasm in innovation.

2015年6月19日星期五

Running the new truck driving and operating method stage

Running in the early stages of the new car should not carry heavy cargo. In the first phase of the new car run-in 100 hours,
The following requirements shall operate Air scissor lift:
1. Before proceeding to deal with the truck to warm up, no matter what the season should do so.
2. Carefully and thoroughly preflight maintenance in accordance with regulations.
3. Avoid emergency braking, emergency steering, start slowly.
The oil change and lubrication should be earlier than the prescribed time.
5. In the absence of external load case, do not make high engine speeds.

2015年6月2日星期二

Don't neglect potential dangers of Scissor Pallet Truck


Don't neglect the potential risks that may exist during the operation.. Maintenance properly will extend the service life of the truck,  walkie reach stacker maintenance of the main inspection of oil, exclusion of air and lubrication.

Check the oil every six months. The new injection oil to the rubber container should be lower than the height of the liquid level 5mm, when adding the oil fork must be at the lowest position. When the seal is replaced,  manual stackers the air may enter the hydraulic system, and the joystick is placed in the LOWER position, and then the handle is more than a dozen times..

Use motor oil or lubricating oil to lubricate movable parts. In addition, note that the daily inspection and maintenance, the handling of the truck inspection can minimize wear, the need to pay special attention to the wheels, axles, handle, fork, lift and reduce control. Whenever work is done,  Electric Hand Pallet Jacks the fork should load and reduce to the lowest position.. Truck in the use of the process will inevitably encounter some failure.