drum truck Sharp high-speed driving is prohibited

Sharp high-speed driving is prohibited, in driving the process, lifting or lowering prohibited goods, etc., under the absolute prohibition of someone lifting frame drum truck‍. Across more than 7 ° Electric lifters‍ slope carrying goods should be at the top of the slope of the goods. Carriage of goods may be made to the brakes and slow speed when driving to prevent cargo slide. When transporting bulky cargo, cargo block the line of sight, the truck should reverse at low speed.

        After non-stop to the engine idling and unattended, but not allowed to hang in the air cargo and the driver leaves the driving position. Battery pallet truck after stopping midway, when the engine is idling pour back door frame, when the engine stop the carriage should fall, and leaning forward to make the goods palle jacks‍ stand with. In the course of their work, that if a suspicious noise or unusual phenomenon, must immediately stop checks, take timely measures to exclude, in the absence of fault shall be excluded before continuing operation.

       After a day of work, the fuel tank filler respond, so not only can drive out the moisture inside the tank, but also can prevent moist gas at night cemented soluble oil in water droplets. In addition, without the consent of the company leadership, no person shall use forklifts. In order to improve the life of the truck and prevent accidents, in order to maintain the best running forklifts and various parts of the normal operation, in the course of the Post lift tables‍ machine must be strictly carried out regular maintenance.

liftstar Scissor Pallet Truck Water rotating spray booth

Water spray booth known as hydraulic rotary spinning spray booth. The laminar flow chamber using a gas mist oppressive way to prevent spread of mist filter with Drum Trucks‍ hydraulic spinning tube scissor pallet truck, is technically more complete spray booth.

Water spray chamber by chamber body rotation, electric doors, mist filter, air supply and exhaust device component unit; lighting equipment installed on both sides of the body chamber, more than 500 Lux illuminance can be grouped control; interior design combustible gas concentration detection and alarm devices; mist filtration device consists of washing the plate, hydraulic spinning device, consisting of ground water tank and exhaust system, mist removal rate> 98%; air conditioning unit is the gas to form the main components of laminar flow, into the air supply chamber Air scissor lift‍ through the filter, after heating, is uniformly sent from the air supply to the room ceiling, the indoor wind speed even when no workpiece vertical wind up 0 .35 ~ 0.4 m · s - 1; exhaust means is the room with the fan body mist containing spinning pipe gas through hydraulic filters, exhaust from between the sink and wash board.

shop crane How safe loading and unloading vehicles.

     A two conflicting performance materials, not while loading and unloading. Of heat intolerance, fear the influx of materials, to take heat, moisture lift mover‍ handling measures shop crane.

     2, the handling of dangerous goods should be light to move gently to prevent collision friction, throw touch vibration. Liquid metal pail destacking, should not use fast humping way packaging to prevent breakage. Repairer of damaged packaging can be moved to a safe location, renovated after handling, may not use the tools that may occur when sparks renovation.

     3, after the completion of loading and unloading operations, should wash their hands, face, mouth rinse or bathe. Midway may not diet, smoking. And must be kept on-site air circulation to prevent contamination of the skin, mucous membranes. Handling found dizziness, dizziness and other poisoning, first aid knowledge by ambulance, weight should be immediately sent to hospital for treatment.

     4, items scattered on the ground, should be promptly removed. No value for the sweep up waste, should use the appropriate disposal physical or chemical methods, to ensure Hydraulic fixed lift table‍ safety.

     5, before loading and unloading of dangerous goods vehicles, you must strictly enforce the rules and relevant regulations, prepare in advance, carefully check the material handling tools and operating equipment. After the work is completed, the tool above the contaminated material must be removed to prevent conflicting substances cause a chemical reaction. For tools operated oxidant items before after cleaning must be cleaned.

     6, the job site should be a unified command, with clear command signal fixed, so as to work methodically to avoid confusion that job accidents. Handling the job site personnel and equipment operators should strictly observe labor discipline, obey orders.

     7, a variety of handling equipment, safety procedures must be developed, through the operation by trained personnel to operate full-time, to prevent accidents.

     8, the operator can not wear shoes with nails. Depending on the hazardous properties and should wear appropriate protective equipment separately. Of toxic and corrosive substances, but also to greater attention should be appropriate to consider a period of time after the operation, a breath of fresh air, to avoid hand jack‍ poisoning. After the operation is completed, the protective equipment should be cleaned or disinfected to ensure personal safety. Various protective equipment should be the person responsible for the custody of special reserve.

‍

drum truck Truck, Stacker performance criteria

When integrated assessment, many companies due to truck expertise and technology do not understand, and often the quality of products can not make a reasonable judgment. Hydraulic fixed lift table‍ In general, the quality of the van and its superior performance is often reflected in the high efficiency, drum truck, high reliability, good ergonomic design, and convenient services, and many other aspects.

1, high efficiency

High efficiency does not only mean speed (driving, lifting, lowering speed), it also means that the operator time required to complete a work cycle is short, and can work in the whole time and always maintain this efficiency. Many factors can promote efficiency: low speed, such as speed, lifting and lowering speed; palle stackers‍ ergonomic design of the application, reducing the number of actions of the operation; precision operation; ergonomic design applications, maximum reduce fatigue; good vision.

2, low-cost

The total cost of the purchase and use of the van business, the annual cost of the required include: procurement costs; maintenance costs; energy costs; labor costs.

Procurement costs will be amortized to the life of the truck. So expensive truck will last longer leaving its purchases to reduce costs. The actual cost of maintenance and repair costs not only parts, but also to the failure rate or downtime related. Therefore, a high-quality truck, due to its low failure rate, its maintenance costs are lower. Energy costs will vary with different truck and a different power system, such as electricity, diesel, liquefied petroleum gas or gasoline. Labor costs is with the driver's number and their total monthly wages in different Manual drum Stacker‍ variations, the number of drivers will be due to the use of high efficiency and reduce truck.

liftstar Scissor Pallet Truck Forklift

Whenever immediately saw someone riding a bike, "slightly creak" "slightly creak" sound, I knew his car broke down. Bicycles can be seen that the bike itself from the lift mover‍ problem of abnormal sound scissor Pallet Truck.

     Forklift is no exception, so when the truck appeared abnormal sound, be sure to check, then what changes forklifts different sound you:

     Forklift different sound is constantly changing, usually from small to big, if not rule out damage to the body or parts.

Abnormal sound changes are generally divided into three phases. Chongqing forklift rental

Early: slightly different sound when little wear influence.

Interim: volume gradually increases, increased Hydraulic fixed lift table‍ mechanical wear and tear.

Late: a significant increase in volume, will have serious consequences.‍

shop crane Pallet Stacker

A former Pallet Stacker, Stacker bottom leg, cargo applicable national standard single tray or tray loading and unloading without transshipment, features excellent Electric store Positioner‍ inexpensive price. 

2, wide leg Stacker, Stacker done before the end of the legs wide, usually within a width of 550 / 680mm, wide legs may be 1200 / 1500mm, removable double-sided tray (length less than the width of the duplex tray confined within), moderate price advantage, you can solve the two-sided tray or require some special goods. 

3, counterbalanced forklift trucks, piled high car bottomless leg before after Stacker plus weights, may be appropriate after the fork forward and backward, in order to ensure that the goods after shoveling level. Benefits: Applicable to a wide, similar to the traditional internal combustion forklifts; Disadvantages: Quick lift Hand Pallet Truck‍ too heavy vehicle for too long, to channel distance requirements are relatively high, and higher prices. 

4, Reach Stacker, basic aspects counterbalanced Similarly, there is no counterweight before the end of the leg, the difference is the car with the door frame fork backwards to move forward a certain distance, usually 560mm, so may be appropriate to shorten the length of forklift trucks, right channel requires a certain ease, prices counterbalanced stacker similar. 

5, all stainless steel forklift trucks, vehicles with stainless steel material, environmental health requirements applicable to high places, such as food, medicine, etc., the price is slightly higher. 

6, riot Stacker, is a special model, mandatory production licensing requirements for higher security requirements of local, expensive, high technical requirements, there are riot riot Drum Trucks‍ Stacker rating logo. 

7, lateral stacker, stacker fork mounted on the side, side loading and unloading operations, the main channel is too small to solve the case, the car is generally the mode of production is the installation of lateral attachments, but the formal mode of production is one of the of lateral forks, I have seen similar models on the German show, priced at one million dollars. 

8, single-column stacker, namely in the form of a traditional mast lift, single lever to lift, the lift speed limit from both sides of the parallel, uniform and stable, generally transmission mode change from chain-belt-type pull, so that uniform lift. 

Above models commonly used models for the market, of course, Stacker classification there are many, especially some non-standard type of forklift trucks, variety, do not list them all, but generally speaking the typical classification, the difference is larger the several models, other non-standard Stacker is liftstar Electric lift‍ generally based on the above models, modify different parts dedicated to.

drum truck High-performance electric vehicle pile Overview

Electric Stacker widely used in factory workshops, warehouses, forklift jacks‍ distribution centers and distribution centers, ports, railway stations, airports, freight yard, and access to the cabin, loading and unloading, cargo handling operations inside pallets and containers. Is a pallet transport, container transport essential equipment. Remote handling, two-sided tray, single tray can be used. Electric Stacker small, flexible operation, easy to drive, the economic environment is the product of choice for enterprise units. Load Range 1t-3 t, lifting height 1-3.5m. Stacker imported from Europe pumping stations and wheels, cargo crossed l smooth and powerful, the handle assembly, responsive, easily controlled. With large capacity traction battery (combination), to ensure that one charge, continuous work 5-8 hours. Low Voltage Electric store Positioner‍ Protection feature protects the battery at low voltage state, long life, with a large-capacity, high-performance battery, with battery lasting and powerful traction batteries can be separated from the body, to facilitate routine battery maintenance.

liftstar Scissor Pallet Truck Pallet Truck

Van (English name: Pallet Truck) that plays the role Electric hydraulic stacker‍ of logistics handling cargo handling equipment. Hand pallet truck in the use of its bearer pallet fork insertion hole hydraulic system driven by the ability to achieve pallet lifting and lowering, pulling completed by human handling operations. It is the most convenient means of transport tray, the most effective, the most common loading forklift jacks‍ and unloading, handling tools.

drum truck AGV (automated guided vehicle, referred to as the AGV),

AGV (automated guided vehicle, referred to as the AGV), for industrial Air scissor lift‍ applications without a truck driver to be charged the battery for its power source. Usually can be controlled through a computer and its path of travel behavior, or the use of electromagnetic rail (electromagnetic path-following system) to set up their travel routes, electromagnetic rail adhesive on the floor, AGV then follow the track brought electromagnetic message to move with the action. 

In addition, such as: hydraulic support van (split into one of the cars and trucks, split hydraulic support vehicles, also known as trailer truck) 

Hydraulic support truck: mining equipment, hydraulic support specifically for mining, mining and other large machinery and handling difficult design a special removal tool, use it Electric hydraulic stacker‍ not only to improve labor efficiency, and achieve a safe move, especially in the working face layout and mining face when moving, reflects its economy and convenience features.