Inclination of the front truck is generally 3 ° ~ 6 °, the angle is 10 ° ~ 12 °.
5, the maximum lifting speed: Forklift maximum lifting speed usually refers to the forklift loaded with cargo lifting the maximum speed in m / min (m / min), said. Increase the Hydraulic fixed lift table maximum lifting speed can improve operational efficiency, but lifting too fast scissor Pallet truck, prone to cargo damage and engine damage accident. Currently the largest forklift hoisting speed has been increased to 20m / min.
6, the maximum speed; increase travel speed has a great influence on improving operational efficiency forklift. 1t of the starting weight of internal combustion forklifts, its full maximum speed of not less than 17m / min.
7, the minimum turning radius: When the truck in no-load low speed, turn the steering wheel when playing the outermost and innermost body to turn the center of the minimum distance, called the minimum turning radius Rmin outer lateral and medial minimum turning radius rmin within . The minimum lateral smaller turning radius, when you turn the truck floor space required is smaller, better maneuverability.
8, the minimum ground clearance: lift mover Minimum ground clearance means the outside of the wheel, a fixed distance from the lowest point on the vehicle to the ground, which represents truck collision raised obstacles to the ability to cross the floor. Minimum ground clearance greater, the higher the forklift through sex.
9, wheelbase and track: refers to the level of the forklift truck wheelbase centerline distance between the front and rear axle. Tread is the distance between the left and right wheels on the same shaft center. Increased wheelbase, is conducive to the longitudinal stability forklift, but makes the body length increases, the minimum turning radius increases. Increased track conducive to lateral stability forklift, but will make the total width of the body and the minimum turning radius increases.
10, the minimum width at right angles to the channel: the channel at right angles to the minimum width is the minimum width for the truck traveling at right angles to and from the channel. In mm. Generally the minimum width of the channel at right angles to the smaller, the better the electric riding pallet jack performance.
11, the minimum aisle width: Minimum width aisle truck during normal operations, the minimum width of the channel.
没有评论:
发表评论