drum truck Forklift Battery safe use and maintenance of the six points

A routine inspection

     1, the liquid level: below the rated level, will shorten battery life, and too little will result in the battery electrolyte heat damage, therefore, must always pay attention to the adequacy of the electrolytic solution.

     2, terminal, wire, cover: You must always check the Hand stacker‍ battery terminal junction, and the connection wires caused by oxidation due to corrosion, and check whether the deformation of the lid, is there fever phenomenon.

     3. Appearance: battery dirty surface will cause leakage, so that the battery surface should be ready to clean and dry.

     Second, the maintenance

     1, add water: according to the level specified in distilled water, do not add water to prolong the interval and add too much distilled water, add too much water will overflow cause electrolyte leakage.

     2, charging: the battery charging process will produce gas, the charge should be kept ventilated place, no fire around, while charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging unplug the charger plug arcing, after charging the machine turned off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover on Hydraulic fixed lift table‍ the battery charge.

     3, terminal, wire, cover maintenance: must be specified by the manufacturer of professional and technical personnel are available.

     4. Clean: If dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally.

     Third, custody

     1. Storage place: You can not make a short circuit; cause a short circuit may occur due to rain fire and may produce a small amount of hydrogen, the battery must be stored in a ventilated, cool place.

     2, scrap batteries: waste battery power is still there, Drum Truck‍ should be kept in accordance with the methods used to store 

batteries.

Wheeled crane safety technology

If you are using and managers to fully understand the whole structure , principles, technical performance, design specified conditions of use , security technology , you will get the best results .

Crane various properties in the actual production can be fully played , depending on the actual use are reasonable. If resorted to improper maintenance , heavy machinery wheeled Zhao difficult to be electric order picker, will exacerbate the wear and cranes sail affecting life , and even cause accidents. If you are using and managers to fully understand the whole structure , principles, technical performance, design specified conditions of use , security technology , you will get the best results . This section focuses on the use of mobile cranes described in security technology.
( A ) the operator
Crane operators should be subject to strict Luo theoretical training expertise and practical technical training , proficiency in vehicle driving and crane operators two technologies. Not only to master the crane structure , working principle and technical performance, and should be read in various cooked Random technical documents, such as hand stacker, manuals performance , operation and maintenance manuals and safe use of rules , but also memorize the various provisions in the operation signals master - · some basic knowledge and skills.
( Two ) safe working environment conditions
Cranes at work due to bad weather, such as high winds, thunderstorms, big men , etc., should stop work ; prohibited in a landslide hazard venue working near transmission lines ; at night or in the operator 's view is obstructed operating conditions , there must be reliable measures , and must be directed with the job ; complex field operations in terms of personnel , generally set Starsky signs and safety fence, or by hand, as the security guard on duty .

Early 19th century, showing a bridge crane

Chinese ancient irrigation is used orange jib crane prototype.
14th century, Western Europe showed a shift of human and animal-driven boom cranes.
Early 19th century, showing a electric pallet jack crane; crane important wear parts such as shafts, gears and spreader used metal materials such as beginning and start optional hydraulic drives.
Late 19th century, steam-driven hydraulic crane gradually replace the crane driver.
The beginning of the 1920s era, because the electrical industry and the rapid development of the internal combustion engine industry to electric motor or internal combustion engine-powered equipment of all kinds cranes fundamental composition.
Composition layout
Include hand stacker cranes primary organization, functioning organization, luffing organization, reverse tissue and metal layout. Lifting crane organization is a fundamental task organization, mostly by hanging system and winch components, but also through the hydraulic system lifting heavy objects. Organization to operate or adjust the level of vertical migration of heavy crane operating position, is usually caused by motor, speed reducer, brake and wheel components. Luffing jib type organization only equipped in the crane, jib looked up and downs when reduced, bent downs when increasing amplitude of balanced and unbalanced luffing two kinds. Reverse organizations use to make the boom reversed, is supported by the drive device and the reverse devices. The layout is the skeleton of metal crane, the primary carrier such as bridge, boom and mast for box-shaped layout or truss layout, but also for web layouts, and some can be used as a steel support beam.

Second, the construction boom characteristics

First, according to whether the running gear
Can be divided into mobile and stationary tower crane tower crane.
Mobile tower crane according to different walking devices can be divided into rail, tire, car type, crawler of four. Rail-mounted tower crane tower fixed on the bottom shelf to walk, you can run on a dedicated Hand stacker, good stability, can walk with a load, high efficiency, which is widely used in construction and installation works. Tire, truck mounted and crawler tower crane trackless equipment, easy to move, but you can not walk with a load, poor stability.
Stationary tower crane according to different installation location, is divided into self-elevating and attached inner climbing type two, self-elevating tower crane can be attached to the building with the temperature increased for high-rise buildings, structures only withstand horizontal loads coming from the crane, attached to convenience, but take up more than structural steel; internal climbing tower crane inside the building (elevator shafts, stairwells), using a set of brackets and lifting system for climbing, Scissor lift more burdensome , but take up less structural steel, does not require installation of foundation, all the weight and the load borne by the building bear.

Second, the construction boom characteristics
Can be divided into luffing jib luffing (boom) and trolley boom (flat arm) tower crane.
Luffing jib luffing jib tower crane is lifting unrealized by luffing, and its advantages are: give full play to the effective height of the boom, simple mechanism, the disadvantage is the minimum amplitude is limited to the most significant 30% so, can not completely close the tower, luffing jib together with the load when lifting, can not take the load amplitude.
Trolley jib tower crane is by horizontal boom track mounted Trolley realized range, and its advantages are: amplitude range, the trolley can be approaching the tower, band load amplitude, shortcomings are: boom force situation is complex, demanding for the structure, and the boom and the car must be in the building upper spire roof mounting height of buildings to be higher than 15-20 meters.

affecting their life support device failure will frequently generated

(A) Installation
     (1) Truck Crane slewing bearing (unit) clean. Prior to installation, carefully cleaned down to the mounting surface, the cleaning liquid can not enter inside the raceway.
     (2) Cranes and ask to be transferred bearing surface is machined. Slewing ring mating surface with the upper and lower ends of the circumferential surface of the whole range of requirements to achieve good bonding area above criteria.
     (3) slewing ring mounting Hand stacker with the mounting holes on the bottom ledge concentric ensure accuracy. Otherwise bearing easily deformed, affecting their life support device failure will frequently generated.
     (4) the installation of slewing bolt length not less than 5d (d - bolt thread nominal size). If blind hole, then tighten the screws in the installation should not touch the bottom of the hole.
     (5) to prevent the bolt head and the nut is pressed stains material below, must pay attention to the compressive strength of the mounting surface.
     (6) the required number must be used to provide specifications of the tensile bolts.
     (7) of the bolt head and nut lower surface pressure dispersion, preferably using quenched flat washers.
     (8) bolts, threaded parts, the head, nuts and trapped between the pad friction surface must drip a little oil.
     (9) bolt preload must reach 70% of the material yield limit.
     (10) may not be used under any circumstances spring washers.
     (11) All nozzles shall be installed in an easily accessible area, and should be added to the required amount of lubrication sufficient punishment.

A crane sit tight in the first Middle East

By June this year, in two and a Hand stacker hours, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
In June 2012, Saudi Arabia's largest leasing company hoisting revisit the Trinity, has signed a more than two hundred million yuan of large orders, and became a thirty-one exclusive distributor in Saudi Arabia.
By June this year, in two and a half hours, Trinity has sold more than four hundred in Saudi cranes, worth more than $ 800 million in market share is nearly 40%. Become Saudi regional sales champion.
Back in time to 2011, when Saudi Arabia's infrastructure construction in full swing, you need a large number of cranes, and that a large single thirty-one have faced many opponents.
At that time, general manager of the Saudi subsidiary after multi-party efforts, and finally let people come to the domestic investigation, powerful and complete product performance to conquer the customer, and ultimately successful large single sign.
By this year, Saudi Arabia is ready to develop the world's largest public transportation system, new opportunities and new challenges are coming, Trinity ready!

Technological innovation, customer needs combined with the depth of the world's resources

 Along with the domestic and foreign enterprises to carry out the process of globalization, the integration of the global market, the future is no longer bound by the state format divide, technical barriers constraints. Resolution firm location will be shopping resource companies in the world, the strategic interests of the redistribution process orientation and strategic execution.
 Current foreign companies are moving rapidly into the crane China. Liebherr early nineties in the last century have to enter the Chinese into the early twentieth century Terex, multi-country, Komatsu, the world's big-name companies are also quick squeeze Chinese crane. Manitowoc also in season this year launched a "Win in China" program. Thus, numerous giant crane strong presence in China the world.
 At the same time, Chinese companies are also moving rapidly planning global, through funding, localization serve to launch the product fit local norms, to seize the world mall. XCMG, north, Liugong, Zoomlion, welfare and other brands were digging constantly into the world market, especially XCMG truck crane last year was invented only a year of total exports 1.9 billion yuan, accounting for exports of its truck crane 65% of the total.
 Fourth, the hard power and soft power blend of depth
 Chinese crane career to complete with the world, not just relying on the crane manufacturing industry, encompassing parts production to promotion, but also downstream lifting career in the construction process technology transformation, lifting managerial innovation, and user technology, knowledge All promotions. In the first advance under the enterprise to vocational technical advancement lifting as the starting point of all femoral artery downstream industries using strength promotion, promote career advancement lifting of the air has been very dense. In this regard, XCMG after hoisting technology and promote the national contest, writing "large equipment hoisting Practical Handbook", fuck machine hand training base made the first active and fruitful quiz.
 Fifth, is the professional conduct and corporate citizenship responsibilities depth blend
 Occupation every enterprise assume this responsibility in full, regardless of Wenchuan, Yushu is still Yunnan, as well as affect the normal operation of the size of social disturbances, everywhere you can see the crane fast rescue scene. One under the crane enterprises attach importance to the expectations of elementary school, charity, Hand stacker other projects, but also to establish and carry out growth.
 I fear, the depth of integration, is becoming the most mobile cranes career milestone industrial change in the meaning.

Helicopter lift table to how to care for

Helicopter lift table to how to care for
Published: June 21, 2012 Hits: 16

Hand stacker lift table to how to care for

 Lifts lift maintenance personnel to enter when the internal work, we must prevent the elevator lifts Diaozhu sudden drop in casualties.

1, check the wheel, intermediate shaft and bearing; cylinder pin and bearing; boom hinge shaft and bearing lubrication and wear;

2, each of the above components add oil. Extend bearing life.

3, check the hydraulic oil and the oil level. Highest hydraulic lift table rises above the bottom of the reservoir oil level should be 40-50 mm. Darkening of hydraulic oil, oily sticky, or oil with gravel and other foreign matter should be promptly replace the hydraulic oil. The hydraulic lift system applications 32 # hydraulic oil.

 Life jackets, searchlights and other electric lifts emergency rescue supplies, streets and communities to strengthen flood control effort, equipment, pumps for each street, Flashlight, lifting platforms, ladders, ropes and other flood control tools distributed to the front line, to strengthen neighborhoods and communities heavy rainfall to 23 emergency facilities, including the upgrading of electricity, security equipment and electric lifts serve the like. - Helicopter lift tables

Each equipped with electric lift pumps streets, bright flashlight, hydraulic lifting platform, ladders, ropes and other flood control tools distributed to the front line, to strengthen neighborhoods and communities to 23 heavy rainfall emergency facilities, including the failure to achieve the balance of payments.

 After discussion, the resolution to find the scene commanders experienced huge migrant workers when helmsman, Lee streets and communities to strengthen flood control effort, equipment, pumps for each street, Flashlight, hydraulic lifts, ladders, ropes and other flood control tools distributed to line, to strengthen neighborhoods and communities with the construction of an electric lift with the fire brigade to the bottom contained rescue 15:45, the commander will alert the war players are divided into groups, rescue groups, and set the scene safely inspect the rescue group members wearing empty call. - Helicopter lift tables

Hand Pallet Truck Note the use of which

Hand stacker in the usual life, to people's lives is a big help, the selection of quality truck carrying a lot of items that can help, but we use it for hand truck use what precautions? is not very clear for everyone here explain in detail.
First, professionals, hand truck when in use, capable of carrying the weight of the items have a certain standard, do not exceed this weight, otherwise, more prone to danger, while for the fork tool, must be insert All goods below, and then placed in a uniform slowly forks, when in use, remember to pick a single fork tips cargo.
Secondly, the manual handling car starts, to a smooth start-up, after turning in a smooth, if driving on relatively smooth pavement, wet pavement, or after, then, we should be slow down.
Furthermore, the manual handling car in the face of the ramp, when to pay attention, be careful driving, otherwise, it is easy to cause accidents.
Hand truck operation, although relatively safe, but when traveling, or need to pay attention to the pedestrian street, not because the car lost control and hazardous manual handling, hand truck when in use, is to load material, not to be able to use hand truck manned.

the electrical system

Taixing hydraulic jacking force recommended electric stacker important part of the [electric forklift IT Technical Support]
Electric Stacker is widely used for factories, automated warehouse, logistics, power, transportation, petroleum, chemical, enterprises, stacking in warehouse Hand stacker plays an important role. So Electric Stacker has several components which it?
1, the hydraulic system
 Each electric stacker supply base has a set of hydraulic systems, hydraulic scissor pallet truck  hydraulic tank assembly led some small parts a certain pressure, the oil filter, hydraulic cylinder balancing valve into the lower end of the hydraulic cylinder piston moves upward , heavy lifting, and so on, but it works. In addition, electric stacker pedal there is a cushion rubber shock absorbers, can reduce electric stacker when walking over rough ground on the end of round impact.
2, the electrical system
 By the instrument panel, drive motors, controllers, batteries and other components. When the battery is fully charged when displayed on the instrument panel, operating instructions issued by the controller to perform all the work required to complete the task.
3, security guard member
Safety components, emergency braking systems, crash protection arm, crash protection block, these baked protected mode corresponding to play a security role.

Crane manufacturing industry is closely related to urban construction, transportation, energy development and other people's livelihood cause of the industry. In recent years, China's crane industry has achieved rapid development. To bridge gantry crane manufacturing company, for example, to 2008, China's bridge gantry crane has about 450 manufacturing enterprises, employing over 14 million people [1]. If these enterprises are divided into three echelons: big play, too heavy in the first echelon, they are the industry's largest economy enterprises, with national technical center, comprehensive strength, in order to produce high-end products, such as nuclear ring cranes, large weight metallurgical cranes, foundry cranes, large dock cranes, etc.; second tier that includes Weihua Group, including China's top 20 companies, most of them have plant-level technology center, which is the establishment of Weihua Group regional technology center in Shanghai set up a product design and Research Institute, these enterprises are the backbone of the industry, products cover a wide range of high-end products both in bidding, also participated in the competition from cheap generic products; third echelon is the remaining four hundred SMEs, which generally are small, roughly the same product type, and to be priced competitively based market share effective strategies to enable these enterprises generally poor, severely Hand stacker the pace of development. Then, in the vagaries of the market today, a large number of third-tier companies, the fate of which way to go?Check the overhead crane and even the loose coupling "scroll keys." Focused on checking flexible pin coupling elastic rubber ring without abnormal wear on tooth gear coupling ring to pay special attention to its wear condition. Poor accuracy due to the installation, the two large offset between the shaft case, the performance of the entire ring will soon wear short bald. If the lifting mechanism in such a case, prone to serious accidents.

Full Electric Stacker Semi-Electric Stacker Electric Stacker Stacker

Full Electric Stacker Semi-electric stacker or maintenance considerations
February 27, 2012 Read 1861 times Tags: Full Electric Stacker Semi-Electric Stacker Electric Stacker Stacker
Summary: Only through the system to learn before they can be full-or half-Electric Stacker Electric Stacker maintenance work, repairs to keep the venue clean. Maintenance, Do not carry loose items or valuables. Maintenance Full Electric Stacker Semi-electric stacker or electrical systems, should come into contact with energized metal electrics tacker components could easily lead to a short circuit or fire. So please, take off the watch, earrings or other ornaments.
1, only to learn before they can carry on through the system all-electric forklift trucks or semi-electric stacker maintenance work, repairs to keep the venue clean.
2, maintenance, Do not carry loose items or valuables. Maintenance Full Electric Stacker Semi-electric stacker or electrical systems, should come into contact with energized metal electronic components could easily lead to a short circuit or fire. So please, take off the watch, earrings or other ornaments.
3, all-electric stacker or semi-electric stacker repair, first unplug the power outlet and disconnect the power.
4, in the open left cover or electrical system, you should turn off all electric stacker or semi-electric stacker key switch.
5, in the check-electric stacker hydraulic system, should make the fork down and release system pressure.
6, check electric stacker spill condition, please wipe with paper or cardboard, not touched with bare hands. To avoid burns.
7, note that gear or hydraulic system oil temperature may be higher, you should first make full electric stacker or semi-electric stacker After cooling, then replace the gear oil or hydraulic oil to prevent high oil temperature result in burning.
8, electric stacker hydraulic system should raise new clean oil.
If oil is not clean, it will affect the precision of hydraulic components, reduced ability of the entire hydraulic system.
If different brands of Hand stacker oil, there is damage to the hydraulic components, but also affect the system capacity. So, when you add or replace the hydraulic fluid, be careful to use a unified grades.
9, please comply with the relevant laws and regulations, protect the environment, the required storage and discharge of oil, do not be discharged into the sewer.
10, electric stacker welding, disconnect the battery power. Because welding, the welding current may enter the battery, in order to avoid such occurrences, please disconnect the battery.
11, in full-or half-Electric Stacker Electric Stacker below when working full-or half-Electric Stacker Electric Stacker stand braced application

ulture technology innovation team

With the development of market economy, logistics and technology in economic development, the status and role more and more obvious, forklifts increasingly high penetration rate, from the past, a single port terminal for use in all walks of life into the national economy, the market potential is huge . The truck has a strong profitability and lower barriers to entry also attracted other industries and enterprises to join.
At the national policy of stimulating domestic demand, supported by the majority of enterprises to adopt structural adjustment, strengthen the competitiveness of advantageous industries, developing domestic and foreign markets, prompting heavy machinery industry managed to maintain steady and rapid growth. For example: Hand stacker earthworm warehouse handling equipment Manufacturing Co., Ltd. since 2005 engaged in warehousing and logistics equipment design, manufacture, installation and logistics planning programs work in the company's development process, has been pursuing a "technology-led" principle,  culture technology innovation team , developed with leading storage products and automated logistics systems. Hebei earthworm in the production and sale of machinery and equipment market practice, it is also developed its own high-quality products - Shaped truck. On the one hand to meet customer demand for special cargo handling, it also increases their competitiveness in the market. Earthworm business came step by step, has withstood the test of the market and customers, to the market, but also give yourself to produce a perfect answer.
It is undeniable that Hebei's development is inseparable from the dragon machinery market environment, and promote prosperity increasingly the main camp forklift or because the domestic market is not saturated, there are many companies like Hebei Dragon of machinery, like to seize the opportunity. But industry experts said that although the market situation has improved, the truck market is still very fragile environment, customer requirements for product quality will be higher. With the further improvement of the truck market, domestic forklift industry in turn set off a "quality" as the theme of the competition.

cargo terminals and other transportation hubs established pallet rental and recycling sites

World plastic tray large changes in the environment directly affect China
Unitization is loaded cargo container unit based material handling, packaging, storage, transportation and other logistics activities is one of the ways to do transportation, cargo pallets assembled unit posed as a platform, and forklifts, cranes, shelves, containers, automobiles, trains, ships, aircraft, warehouses, distribution centers and other related equipment, appliances, facilities combine uniform, throughout the whole story, and ultimately all sectors match logistics, unified, coordinated, smooth and penetrating, reaching a low of logistics costs, high efficiency. Among them, the tray is the most basic logistics apparatus, nexus, the past and the carrier, but also the entire logistics process based on the most critical elements. Whether the use of the breadth from the tray, or from the tray and the tray using the links of common features of systemic and any other point of view, the tray can be termed as the entire logistics logistics large systems is an important branch. A lot of practice shows that in order to promote the packaging tray as the base modulus, truck performance, automotive envelope and container specifications, shelves and goods matching the criteria grid size is very scientific and rational; constant in the standard pallet logistics, transport, storage, Hand stacker, packaging, distribution processing, distribution and other logistics various aspects of the combination and joint degree can be avoided in the logistics process waste, substantial cost savings; logistics perspective from a pallet logistics is scientific and rational, can significantly improve the efficiency of the logistics of the whole process.
Understanding of the role people pallets time though not long, but early in the Pacific War, Australia set up a pallet pooling company, in the 1950s and 1960s, the United States, Britain, France, Germany, Sweden, Switzerland, the Netherlands, Australia, Canada and other countries have begun at the dock, cargo terminals and other transportation hubs established pallet rental and recycling sites, and later established the European Euro pallets pallet pooling organizations and associations. Although the Japanese started a little later, but at least 40 years ago set up a tray Association. Beginning of 1965 in Beijing and Shanghai counterparts to carry out tray intermodal interval, 80 Ministry of Transportation has earmarked to promote Shanghai and Dalian interval pallet transport. After entering the new century, pallet production and use of an unprecedented happy situation changed greatly, the development of the fierceness surprised the world. The reason is due to enter the 21st century, China's logistics "hot" continues to heat up, the tray in the rapid development of logistics in lagging behind, as the rapid development of the logistics of the "bottleneck" urgent requirement as soon as possible to change the status quo. To this end, China Federation of Logistics and Purchasing in 2002 decided to establish Pallet Professional Committee commissioned Beijing University of Science and Technology Research Institute is responsible for organizing the logistics work. In June, the Federation issued IOT lines [2002] No. 89 document, the appointment of Wu Ching-a professional committee for the pallet (chips) chairman, Jin Wei, the Secretary-General. . Pallet Professional Committee (chips) was established immediately began a massive tray research activities, basic grasp of the country at the time pallets production and use. Discovered that the old country only 135 pallets manufacturers, tray liquidity in 5000-70000000 a range, but in just three years later, in 2005, China's pallet production enterprises soared to 650, yield 25 million in 2006 in our market pallet circulation totaled 150 million, of which plastic tray The growth in the proportion of 30% or more, China Tray network statistics also confirmed that China's current annual sales of approximately tray 100000, trays site membership increase of up to 40%. Substantial increase in demand for our pallets, pallet market expanded rapidly, the foreign-invested enterprises to pour in, poured into. The end of 2006, there are five foreign companies in China to set up pallet system or liaison office, which four have begun to focus on in the territory cities to carry out preparatory work. world's largest plastic pallet projects - Switzerland PPAL Company and each of Maoming Petrochemical Industrial Zone, Sinopec Maoming Branch signed a total investment of 300 million euros, an annual output of 6 million plastic

Nanjing manual hydraulic drive principle

Forklift Services Ltd. located in the beautiful coastal city - Xiamen, the main products include forklifts, manual forklifts, manual hydraulic forklift, electric forklift, pallet truck, Hand pallet trucks, bucket truck, electric pallet trucks, forklift trucks, lift trucks , elevated cars, trucks, hand truck accessories and related material handling equipment and provide technical support and training related to the truck for three consecutive years through the national quality supervision and inspection. And on December 6, 2007 passed IS09001: 2000 quality management system on-site audit, is a "heavy contract, the word" enterprise, 2O08 was granted the "AAA grade credit enterprise." Since its inception, has been the spirit of "honesty, quality and cheap, people-oriented" excellent service, to win the support and trust of the majority of users. Xiamen, Quanzhou, Zhangzhou and other places can be delivered to your door,
Nanjing manual hydraulic drive principle: manual, mechanical, electric pumps are used to achieve the basic through to the pump pressure, pump the pressure is converted to mechanical energy, and thus the piston rod from the top, led the actuator arm, actuator arm will push rod before the push to promote support from the front so that the forks so that the forks descend through a valve control, the Chinese truck, rise height in 75-100mm, Nanjing pallet truck works basically like this. Nanjing Hand stacker Category: Nanjing can be divided into galvanized hand pallet trucks, stainless steel hand pallet trucks Nanjing, Nanjing fast from senior hand pallet trucks, hand pallet trucks heavy Nanjing. Nanjing hand pallet truck is mainly applied to horizontal transport and crowded places where the user can according to different conditions needs to choose the most suitable model. Nanjing hand pallet trucks are divided into standard, rapid lifting, low-end, galvanized / stainless steel type, Paper type, electronic scales heavy, 5T heavy duty; carrying capacity of 1.0 to 5.0 tons, operating channel width is generally 2.3 to 2.8 m. ***
(Nanjing manual hydraulic trucks, hand pallet trucks Nanjing, Nanjing manual forklift)

Construction crane industry development status analysis

   In recent years, China's construction machinery industry get rapid development, where construction cranes are among one of the rapid development of the aircraft. Since 2006, China's construction cranes deepening of enterprise reform, continuously improve product quality, new products continue to emerge, product sales and export volume is growing. It should be said Hand stacker China's construction crane industry has entered a stable and sustainable development.