keep the system clean
1,
when the maintenance truck cylinder hydraulic system, can only be used
to clean the plastic bulkhead seal the ends of the pipeline.
2,
maintenance of hydraulic components, workstations must be absolutely
clean. Check status of the use of tools. They should also be very clean.
To refuel or refill the tank, make sure to clean the area liftstar Rider Pallet Truck around the filter cover. Use only clean oil and funnel or container. Never dirt into the system - only clean oil.
keep clean areas clean about
Periodic
replacement of hydraulic oil and oil seals. Good hydraulic oils contain
a variety of additives, which prevent deterioration of the oil or
clogged system components. However, these additives lose effectiveness
over time. Therefore, oil should be changed regularly to ensure that the
role of additives. Filters can only absorb a limited number of dirt Post lift tables particles and other impurities from the oil. The recommended filter replacement cycle, in order to keep the system clean.
没有评论:
发表评论