Industrial transport vehicles are widely used in ports, stations, airports, freight yard, factory workshops, warehouses, distribution centers and distribution centers, etc., and can enter the cabin, cars and containers for pallet cargo handling, handling operations, tray transport, container transport Indispensable equipment.
Forklift in the enterprise's logistics system plays a very important role, is the main force in the material handling equipment. Widely used in stations, ports, airports, factories, warehouses and other departments in the national economy, is mechanized loading and unloading, stacking and short-distance transport of efficient equipment. electric walkie pallet jack appeared in 1917. During the Second World War, the forklift was developed. China began manufacturing forklifts from the early 1950s. Especially with the rapid development of China's economy, most of the enterprise material handling has been divorced from the original manual handling, replaced by forklift-based mechanized handling. Therefore, in the past few years, China's forklift market demand every year to double-digit growth rate.

electric rider pallet truck because of its operational control is simple and flexible, the operator's operating intensity is much lighter than the internal combustion forklift, the electric steering system, acceleration control system, hydraulic control system and brake system are controlled by the electrical signal, greatly reduced The labor intensity of the operator, so as to improve the efficiency of their work and the accuracy of the work is very helpful. And compared to internal combustion forklifts, electric vehicles, low noise, no exhaust emissions advantages have also been recognized by many users.
In addition, the choice of High Lifting stacker there are some technical reasons. The rapid development of electronic control technology makes electric forklift operation more and more comfortable, the wider the scope of application, to solve the logistics program more and more. These aspects, the electric forklift market demand will certainly grow faster and faster, electric forklift market share will be more and more.

All-electric van, all-electric stacker common faults and troubleshooting methods

All electric van, all-Electric and Manual Straddle Stacker in the use of the process will encounter some of the more common failure, so the failure does not require professional forklift maintenance personnel to deal with, only need to repair maintenance personnel to deal with the fault on it, we look at See, all-electric van, all-Electric Straddle Stackers common fault which? How to deal with
All-electric truck common fault and troubleshooting methods:
All the electric van in the course of the use of hydraulic oil leakage failure, the approach is very simple, this is due to the seal wear or fracture caused by this time only need a better seal on the cylinder can, and a May be inside the cylinder parts of the wear and tear of the general cracks, this time only need to replace the inside of the cylinder can be spare parts, such as seals will lead to air into the hydraulic system, this time only need to rise and fall many times, that can be discharged hydraulic The air inside the tank; all electric van did not put pressure but the truck down, this may be impurities in the hydraulic oil, resulting in the valve can not be closed, this time only need to replace the clean hydraulic oil can, and there may be Put pressure valve is not adjusted, this time need to adjust the pressure valve on it.

Forklift battery safe use ten points

semi electric order picker traction battery, also known as High Lifting stacker, as the forklift driver, must comply with the correct code of practice, safe use, keep in mind the following basic ten points Note:
    1. The battery will produce hydrogen, may cause an explosion, is strictly prohibited in the vicinity of the battery smoking, is strictly prohibited any flames or sparks. The battery must be in a well ventilated place during storage or charging, but not at the outlet, to avoid corrosion caused by acid mist.
    2. The battery liquid contains corrosive liquids, may cause severe burns, to avoid contact with skin, eyes or clothes, if unfortunate accident, please immediately rinse with plenty of water, and quick medical treatment.
    3. When checking or servicing the battery, use rubber gloves to avoid electric shock.
    4. The battery surface or connection must be kept clean. Dust, impurities, etc. must be cleaned with a damp cloth, otherwise it will leak, and even cause a fire.
    5. When cleaning the battery, be sure to use a damp cloth, do not use dry cloth.
    6. Do not connect the positive and negative electrodes of the battery with tools.
    7. Charge the electrolyte temperature should not exceed 50 degrees Celsius, so as to avoid electrolyte damage caused by overflow, especially during the summer to pay attention.
    8. Before pulling the battery plug, to avoid sparks, be sure to turn off the forklift key switch and charger switch.
    9. Electrolyte surface should not be below the minimum, otherwise the battery is hot, easy to burn.
    10. children do not near.