2017年4月6日星期四

Do not operate the hydraulic system before the hydraulic system oil gets hot.

therwise, it will damage the hydraulic components. electric rider pallet truck in the driving to control the speed, keep the car away from, to avoid emergency braking, cold season braking interval than usual to extend about 2 times. It is forbidden to steer and reduce the impact force during cornering to prevent breakage of the rigid structural parts.
To do the equipment season maintenance work, the detection of antifreeze freezing point, making it lower than the local minimum temperature 5 ℃; so that the temperature of the thermostat open at about 82 ℃; the battery electrolyte density raised to 1.280g / cm3; timely adjustment of the machine The Ministry of oil, the work of the field equipment to install insulation measures, if necessary, install the engine oil preheating device, and start the engine regularly, preheat the various parts of the working system.
Normal start-up of the engine should have sufficient warm-up time to operate at low speed light load until the oil in the engine, transmission, hydraulic system and final drive heats up. Equipment at work, the operation of the bucket, blade and a variety of devices to be slow, to prohibit the impact of large throttle, scraping, shovel and push, the focus on "stable" and "slow". Winter is the season of high accidents, accounting for about 80% of the total annual accidents, and winter accidents due to operational accidents caused by more than 65%. If the temperature below -15 ℃, the engine can not start immediately after the start of the work, but should make the engine to 1000-1100r / min running 10-15min, and the transmission in neutral. So to regularly check the forklift machine rigid connection and the main load-bearing parts.

没有评论:

发表评论