General national standard tray height 100mm
Some customers buy at the beginning of the time of hand pallet trucks will not start feeling a little bit , I do not know what kind of truck specification is suitable for their own , and but also inexpensive. Here I will introduce a few tips:
1 , the width of the fork
?Width depends on the size of pallet forks , the general manual hydraulic car standard size cars and narrow width of the car , wide car 685 * 1200mm, narrow car 540 * 1150mm.
In general , there are international吨2.0t-2.5 -3.0t-5.0t, these four load .
3 , fork lift height
General national standard electric pallet trucks tray height 100mm, national standard hand pallet trucks under the minimum height in this course so . General hydraulic truck into the lowest point when the height is 85mm, 75mm are two, of course, there are special low discharge cars , the minimum is reached 65mm. Low price is slightly powered pallet truck expensive to put the car in general , there are no special needs do not recommend purchasing
4 , plate thickness Fork
Generally a little better 3.0t car uses a 4mm steel plate , and the plate thickness difference plus some paint thickness are lower than 4mm, some even only reach 3mm, so jerry exchange price advantage for consumers is very pay obligations. This car is easy to fault in subsequent use. In addition , 5.0t hydraulic car plate thickness should reach more than 8mm , so it would be difficult to bear weight .
5 , Wheel Material
Ground conditions must keep the job to decide. You can choose ground conditions smooth polyurethane wheels , the ground is not good , you can choose aluminum with plastic wheels , they are more resistant.
More exciting content , all in Hebei earthworm truck .