Pallet handling equipment with operating control

    Walk truck with plastic tray stacking height is generally used to control the turnover 5m or less. To ensure safety, security should be installed in the aircraft operating area . Load hoist truck walking speeds between 0.1 ~ 0.2m / s, the speed and the battery voltage to enhance the size of the form lifting frame , load weight and the size  of the pump . Unit load height, width , length and weight must be consistent with standard shipping . Transportation standards including pallet size, transport Straddle stackers  distance and stacking height. Also, consider the slope of the slope, the floor load conditions , lift limit , operating and environmental conditions affect the clearance of the unit load.

    Pallet handling equipment with operating control: Walk -in vehicle operating efficiency directly affected control mode . Control issues including speed, etc. upgrade , brake and reverse control . Controlled by the horizontal movement of the handle end portion to  enhance Hand fixed lift table the speed and direction to achieve control . There are two steps forward  speed   control general type, third gear type and backward control . The lift and down by hydraulic control or manual electronic switch lever to achieve. Brake  control is automatic braking when the steering handle in the vertical and horizontal position. When the handle is operable at any other position when the vehicle ahead. In order to improve operational safety and efficiency of handling equipment , forklifts also handle back function .

    More, all in Hebei earthworm Electric Stacker .

    Related articles : Warehouse Assistant push flatbed