For cranes with load when walking

For cranes with load when walking , self propelled pallet jack because the body shaking, boom along the pitch , the rates are constantly changing, but also because of the inertia of the heavy lifting and swinging , hanging oblique form , therefore , from the weight of the load shall not exceed the allowable 70 % solid walking path should be smooth, heavy cranes should be positive in the forward direction , hydraulic hand truck to facilitate the operator to observe and control the weight from the ground shall not be greater than 500mm, and should be well tied rope , slowly. Non- load driving long distances .

non- neutral slide downhill .

When the crane downhill , gravity and magnitude of the crane Hand fixed lift table boom with the slope and, therefore , should be no-load crane walking down the ramp , the uphill elevation should be appropriate to put a small boom , will play when downhill boom elevation appropriate amplification . Neutral downhill slide will result in loss of control accidents, Post lift tables non- neutral slide downhill .

two crane hook pulley should remain vertical.

In order to make a reasonable allocation of loads and synchronous dual action , should lift crane unified command , ride on pallet trucks the action should be coordinated with the load should be allocated on a reasonable , single lifting loads must not exceed the permissible load of 80%. To prevent overloading the lifting process , Hand pallet jacks two crane hook pulley should remain vertical.

When the crane is stopped while still hanging heavy in the air

When the crane is stopped while still hanging heavy in the air ,Electric pallet truck even if the brake pedal is fixed , should foot on the brake pedal , while in case of danger to timely control to ensure the safety of lifting operations and reliable.
9. Hoisting the use of dual job, should be used crane electric platform stacker lifting a similar performance

to prevent cave- hook .

Lifting operations may not have the slightest error , work positioners lifting heavy objects should be hanging slightly off the ground interview , when the weight has been linked to the prison to confirm the reliability and stability of the crane brakes are good , and then continue lifting, in order to detect and eliminate insecurity. In the process of weight lifted , the operator should put his foot on the brake pedal , electric walkie pallet jack pay close attention to lifting heavy objects , to prevent cave- hook .

Implement measures to prevent falling lid

Immediately stop driving, the position of the specified test results, the drive wheel mounting bolt 6 which two books wreck. Residual ri four loose bolts also found a set of worst-case fall accidents can be avoided.Reason 1. Bolt position Quick lift Hand Pallet Truck crane inspection body a little less than the lower part.loose bolts were implemented，Measures 1 additional point inspection record sheet, hand truck dolly check the implementation of education.loose bolts to stop the implementation. Implement measures to prevent falling lid

platform stacker

Vehicle use three-dimensional software for system and component design.Industrial design vehicle using a fresh look for creative design.All the wheels are made of polyurethane imported parts，Hand pallet jacks can control on the ground, but also in the lift together with the fork cab control. Nominal weight is generally 0.5 to 5 tons, some up to 20 tons, mainly for height of 12 meters, platform stacker the span of less than 20 meters in the warehouse.

Hand pallet jacks

High-quality, Hand pallet jacks large-capacity domestic 430Ah battery, continuous working hours to extend and improve production efficiency. (It can be equipped with imported batteries according to user needs)，Goods crossed liter four-bar linkage system, more reliable, easier to manufacture and easier to obtain high manufacturing precision.The vehicle is provided with a large operating handrails and non-slip platform fixed station, reach trucks to provide a more humane level of security for the operator.

reach trucks

Overall motor drive system (with electromagnetic brake); SACS walking motor vertical arrangement, fever running,reach trucks reliable performance; with driving and steering functions.Integrated hydraulic power unit, set hoisting motors, control valves, gear pumps and piping accessories in a tank, smooth, reliable, energy saving, noise reduction.pipe electrically controlled components,Electric lifters with variable speed and thermal protection.

manual stackers

With respect to imports of electric cars, electric cars made in China are generally not installed steering system. manual stackers Most imported electric truck steering systems have been installed.Electric pallet truck for heavy and long freight forwarders can greatly improve the efficiency of cargo handling.This machine is ultra-thin body design, CVT, especially small turning radius,Drum Trucks  the body strong, light and flexible operation, no noise, no pollution, long working hours on a single charge, reliable performance, widely used in logistics, warehouses, factories, hospitals , schools, shopping malls, airports, stadiums, railway stations airports, etc.

Electric pallet truck

hydraulic hand truck widely used in logistics, warehouses, shopping centers, workshops, schools, airports, etc.It is a labor-saving tool for comparing timesaving handling，Hydraulic pump with electric lift,Electric pallet truck using electronically controlled (chopper) or resistive electric domestic traveling speed of adjustment.There are a variety of specifications with pedals and without pedal.Installation with the motor has two vertical and horizontal motor.

Shop Lifter

By infinitely variable travel speed control switch on the handle, follow the operator walking the pace，self propelled pallet jack Reducing personnel fatigue, while ensuring the safety of the operation.Such as major transport route distance of 30 meters to about 70 meters, you can use electric pallet truck with folding pedal，Driver standing driving, Shop Lifter maximum speed can be increased by nearly 60 percent.

Different pallet trucks suitable for any field

Electric hydraulic stacker with motor-powered, battery for an industrial handling vehicles energy refers to a piece of cargo loading and unloading pallets, forklifts, wheeled transport vehicles stacking and short-distance transport operations. International Organization for Standardization ISO / TC110 called industrial vehicles.   Counter-balance Stacker   Electric Stacker include: full electric stacker,  Scissor lift semi-electric stacker, Reach Stacker, Reach full electric stacker, Reach Stacker, pedestrian counterbalanced stacker. Electric Stacker hand pallet trucks  widely used in factory workshops, warehouses, distribution centers and distribution centers, ports, railway stations, airports, freight yard, and access to the cabin, loading and unloading, cargo handling operations inside pallets and containers. Is a pallet transport, container transport essential equipment.

Hand pallet truck two maintenance

 keep the system clean
1, when the maintenance truck cylinder hydraulic system, can only be used to clean the plastic bulkhead seal the ends of the pipeline.
2, maintenance of hydraulic components, workstations must be absolutely clean. Check status of the use of tools. They should also be very clean.
To refuel or refill the tank, make sure to clean the area liftstar Rider Pallet Truck around the filter cover. Use only clean oil and funnel or container. Never dirt into the system - only clean oil.
 keep clean areas clean about
 Periodic replacement of hydraulic oil and oil seals. Good hydraulic oils contain a variety of additives, which prevent deterioration of the oil or clogged system components. However, these additives lose effectiveness over time. Therefore, oil should be changed regularly to ensure that the role of additives. Filters can only absorb a limited number of dirt Post lift tables particles and other impurities from the oil. The recommended filter replacement cycle, in order to keep the system clean.

 

Hand Pallet Truck maintenance to say fine

Hand Pallet Truck maintenance to say fine, in addition to a maintenance, there are two maintenance:
One: keep the Hand Pallet Truck hydraulic oil clean
The hydraulic oil is stored in a clean area, care must be taken when adding hydraulic oil change. Use only clean the filter with a fine grid funnel the oil from the container into the truck cylinder. Hebei earthworm is recommended that you use the hydraulic oil should be the device of the type recommended by the manufacturer.
Two: keep the system clean
Periodic replacement of hydraulic oil and oil seals. Good hydraulic oils contain a variety of additives, which prevent deterioration of the oil or clogged system components. However, these additives lose effectiveness over time. Therefore, oil should be changed regularly to ensure that the role of additives. Filters can only absorb a limited number of dirt Post lift tables particles and other impurities from the oil. The recommended filter replacement cycle, in order to keep the system clean.

Shop crane definitions

Shop crane is in a certain range of vertical lifting and carrying heavy loads of multi-level action lifting machinery. Also known as crane. At present, the major heavy lifting Equipment Co., Ltd. Guangdong Shun launch has gradually canceled hoist with function. The main features of the tire cranes are: its driving cab and crane cab combined, is evolved by the crawler crane (crawler) will be tracked and walking stents have become part of the running gear tire chassis, overcome The disadvantage of crawler crane (crawler crane) track shoes on pavement damage, belonging to material handling machinery. Lifting equipment to do some work is characterized by intermittent movement, that in a work cycle Reclaimer, transport, unloading and other movements of the respective agencies are working alternately, development and use of cranes on the market more widely. Because they are not leg slings and hoists with often some accidents, driving speed are more cranes (crawler) fast; job stability, lifting capacity, can hoist travel within a specific range, but must ensure that the road smooth solid tire pressure to meet the requirements, hanging above the ground shall not exceed 50CM; prohibition to walk long distances with a load. To Shop Lifter ensure the safety of operations, the current domestic basically prohibit the outriggers are not hoisting operation.

Origin and development of the crane

10 BC, Roman architect Victor Ruwais worked in its construction manual describes a shop crane. This machine has a mast, mast mounted pulley by guyed mast position, using a winch to pull cable through pulleys to lift heavy loads. Some overweight machinery available two masts, constitute herringbone, the lift was a lateral move, but only slightly, operation is very difficult.To the 15th century, Italy invented the jib cranes, to solve this problem. This crane has roots inclined cantilever arm is equipped with top pulley, can lift can be rotated. Shop Lifter was not until the 18th century, a variety of lifting machinery are also used by humans to human, animal powered on starting weight, range and efficiency is very limited.In the late 18th century, British Watt invented the steam engine improvements and after, provided the impetus for the lifting machinery condition. 1805, London Lennie Grand engineers built the first steam dock crane. In 1846, Britain's Armstrong to Newcastle dock instead of a steam crane hydraulic crane.Early 20th century, Europe began to use tower cranes,

The origin of the drum car

Drum Trucks a military configuration in the ancient war convey a movable and morale of the military orders. Traction by the dozens of people, placed on top of the diameter of two to three meters of a drum, gong rang several, one person loading drum, gong number of names. Drums can sound pass 10 years, reach trucks usually placed just behind the attacking forces, and to follow the movement of troops together to convey morale and military orders. Xian Wei village in Xiangfen, Shanxi Province, the lunar calendar every March three grand car festival held drum, drum also be run sports car. Relay referendum campaign, one hundred meters a substitution, holding wooden drum vehicle speed less than 50Km / time.

Scissor truck maintenance

scissor lift table life in general in 3--5 years, the proper use of vans and timely maintenance of the transport vehicle to extend its service life. In general, van use, please note the following:1, do not overload;2, whether to allow the use of ground conditions;3, the correct loading of the goods;4, wear good shoes and gloves when operating safety;5, please do a thorough operational check before each use;6. Use the correct lifting techniques assembly machine;7, do not ignore the potential dangers that may exist during operation. With proper care will extend the life of the van, when major maintenance check the oil, remove the air and lubrication. Check the oil level every six months. The new forklift truck injection of oil into a rubber container liquid level is lower than 5mm, when you add oil to the forks in the lowest position. When replacing seals, air may enter the hydraulic system, the lever is placed in LOWER position, then swing the handle ten times. Use motor oil or lubricating moving parts. Also note routine inspection and maintenance, inspection of transportation vans can minimize the wear and tear, require special attention wheels, axles, handles, forks, lifting and lowering control. Whenever the work is completed, the fork should be unloaded and lowered to the lowest position. Van in the course inevitably encounter some failures.

What is the drum car

Drum Trucks, a military configuration in the ancient war convey a movable and morale of the military orders. Traction by the dozens of people, placed on top of the diameter of two to three meters of a drum, gong rang several, one person loading drum, gong number of names. Drums can sound pass 10 years, usually placed just behind the attacking forces, and to follow the movement of troops together to convey morale and military orders. Drum Lifter is the carriage of the Han Dynasty, the car has a wooden stand, hold the hands of drums whip. Each carriage reaching a certain number of years, will be waving wooden drum Chui, in front of the snare drum sounded. In fact, it works is simple: wooden hand cable attached to a gear, gear and other gear attached, forming a reduction gear set, and finally attached to the wheel. Start the vehicle, the wheels on the drive gears, gear drive Muren, Muren then beat gongs and drums. But at the time it was quite scientific and technological content of the invention, even now the taxi is based on the principle of recording drum car counting, of course, this is also one of the top ten inventions in ancient China.

Defined cranes

shop crane is in a certain range of vertical lifting and carrying heavy loads of multi-level action lifting machinery. Also known as crane. At present, the major heavy lifting Equipment Co., Ltd. Guangdong Shun launch has gradually canceled hoist with function. The main features of the tire cranes are: its driving cab and crane cab combined, is evolved by the crawler crane (crawler) will be tracked and walking stents have become part of the running gear tire chassis, overcome The disadvantage of crawler crane (crawler crane) track shoes on pavement damage, belonging to material handling machinery. Shop Lifter equipment to do some work is characterized by intermittent movement, that in a work cycle Reclaimer, transport, unloading and other movements of the respective agencies are working alternately, development and use of cranes on the market more widely. Because they are not leg slings and hoists with often some accidents, driving speed are more cranes (crawler) fast; job stability, lifting capacity, can hoist travel within a specific range, but must ensure that the road smooth solid tire pressure to meet the requirements, hanging above the ground shall not exceed 50CM; prohibition to walk long distances with a load. To ensure the safety of operations, the current domestic basically prohibit the outriggers are not hoisting operations.

What is the Scissor Pallet Truck

liftstar Scissor Pallet Truck One-way cylinder, without rated load is reduced, the risk of a leak-free, unparalleled drive cylinder slipping hazards, ergonomic handle designed to allow the operator more comfortable effort, greater safety, when the lifting of goods is higher than 400 mm, adjustable the stabilizer is activated automatically ensures optimum stability and optimum braking, R01010038 / R01010039 manually when bearer is less than 250 kg, rapid lift function will double lifting speed, reliable: HPI pumping imported from France,scissor lift table in line with Europe EN1757-4 standard. Scissor vans can be divided into electric scissor hand pallet truck and Scissor van and high lift scissor truck.

liftstar Scissor Pallet Truckpurchase

With the present development of social science and technology, more and more widespread use of hydraulic truck, whether it is construction, civil engineering, and people's daily life are inseparable hydraulic lifting machinery, many businesses seize this opportunity and have invested in factories, lifting machinery Companies like bamboo shoots after the rain along with the provisional legislature in the major industrial city, Quick lift Hand Pallet Truck industry is still unusually hot, in short supply, it can be seen from the side, and now the rapid development of society, as well as people's needs drive the development of the whole industry, but as buyers how to choose a good corporate commodity lined lifting machinery become an important topic.
One: buy electric pallet trucks, not blindly buy, to do adequate market research, as well as site visits to determine the size and extent of the company's credibility. This is first and foremost is a must, and now the market many small-scale businesses to cut corners in order to reap the violence, so that the elevating product quality greatly reduced, although they will sell very cheap, but the machine is not used for a long time, and the risk factor Big. Therefore, as the purchase price can not covet a little cheaper and lead to greater small regret.
Two: Comprehensive survey of your data, choose better cost lifting machinery, from the selection of its technical parameters and on the practicality and versatility, usually aluminum lift machinery there are many, including the (car lifts, fixed lifts, hydraulic pallet truck platform, scissor lift, etc.) for each of the technical parameters and use all slightly different, but there are many features somewhat similar, therefore, as the customer you want to buy with the purpose of, That you buy a mechanical lift what to do, and which lifting machinery to meet your needs and use more.
Three: The last point is that after the arrival of equipment, out of the box inspection to check whether the random technical information is complete, random parts, tools, accessories are consistent with inventory, equipment and accessories for damage, defects, and good box inspection record.

liftstar Scissor Pallet Truck works

electric pallet trucks vane pump hydraulic oil is formed by a certain pressure, the oil filter, explosion-proof solenoid valve, throttle valve, check valve, balance valve into the lower end of the hydraulic cylinder, the liquid cylinder piston moves upward , heavy lifting, the upper end of the hydraulic cylinder return oil through flameproof solenoid valve back to the tank, which is adjusted by the rated pressure relief valve, pressure gauge watching the pressure gauge readings.
ride on pallet trucks hydraulic cylinder piston downward movement (both heavy falls). -Oil explosion-proof solenoid valve into the cylinder upper end, a lower end of the hydraulic cylinder return oil through balancing valve, check valve, throttle valve, explosion-proof solenoid valve to the tank. In order to decrease the weight stable, safe and reliable braking, set the balancing valve, balancing loop back to the oil on the road, keeping pressure on the rate of decline from the weight change, the throttle valve regulates the flow, control the lifting speed. For the safe and reliable braking, to prevent accidents, increase check valve, namely hydraulic loader hydraulic lock, ensure that when unexpected burst hydraulic line can be safely self-locking. Overload installed voice alarm, to distinguish overload or equipment failure.

Before the truck storage, thoroughly cleaned, according to the following procedure to check:

(a) in accordance with the need, with a cloth and water, remove the attachment on the body with oil and grease.
(b) cleaning the hydraulic hand truck body, the overall situation forklift vehicle inspection, in particular to check whether the vehicle dents or damage, whether the tire is punctured, whether embedded with nails or stones in the pattern.
(c) fill the tank with the specified fuel.
(d) inspect the Walkie stacker lift truck leaks oil.
(e) lubrication needed.
(f) Check wheel nut, cylinder rod joints is loose, if the piston rod surface bumps and pull marks.
(g) inspect the mast rollers to rotate smoothly.
(h) the lifting cylinder rise to the top so that oil from the fuel tank is full.
(i) during the winter or cold weather, long-term antifreeze does not need to let go, if the cooling water is required exhausted.

How to do a forklift bearing lubrication?

The new lift star truck or hydraulic hand truck stop working long after, within two weeks at the beginning of use, should be lubricated bearings for when lubrication should take advantage of all the new oil out of the old oil and lubrication for more than two, and should pay attention to The following points.
1, should be removed before lubricating oil cap, oil drain plug and nozzle above the dirt, so dirt falling into the house.
2, with a grease gun lubricant injection pressure, injection pressure to be part of the components of the extrusion lubricant combination so far.
3, in summer or winter seasonal lubricant should be replaced

The development of technology innovation Stacker industry remains essential

Electric Stacker has now become the most dazzling star of industrial vehicles, various manufacturers are targeting such a large market development, as the market for electric forklift trucks strong demand, the development of electric forklift trucks are gradually accelerated, the problem also continued with appear.
This time, some industry experts for electric forklift jacks industry summarized the problems, the lack of innovation is an important issue for the industry.
Although today's forklift trucks industry, whether it is quality or safety or cheap sex on both improved a lot, but there is still some room for development. It is precisely because many companies feel that the Stacker products have met the needs, so they feel Stacker aspects do not need to be innovated. In particular, some small manufacturers, the ability to innovate even worse, can only mimic other big brands products exist, but you know, no innovative products or companies are not far away, but now many are also before the product innovation It is considered to be a good product, and an upgrade of their products is a law.
The main business of the lack of innovation for two reasons, one is innovation and investment, high cost, and the other could not find the breakthrough. In this regard the cost of innovation is indeed innovative industrial products only in research and development costs have a great cost. For this problem, the government should give attention to the production of innovative technology companies to financial support, so that enterprises in electric hand jack innovation performance above may be no worries. Faced with the strength and innovation of foreign brands, domestic enterprises still have a long-term way to go.
Product innovation is not to say arbitrary angle to find an innovation, it must be bonded to the market demand and product defects inherent to innovation. If you say that the Stacker what flaws, I believe a lot of people did not. But do not you know there is a difference between electric forklift trucks and other forklift trucks, which also represent these differences, there are some drawbacks and advantages. So, the more is one of the advantages of integrating innovative content, we would like to see more domestic enterprises to show more enthusiasm in innovation.

Running the new truck driving and operating method stage

Running in the early stages of the new car should not carry heavy cargo. In the first phase of the new car run-in 100 hours,
The following requirements shall operate Air scissor lift:
1. Before proceeding to deal with the truck to warm up, no matter what the season should do so.
2. Carefully and thoroughly preflight maintenance in accordance with regulations.
3. Avoid emergency braking, emergency steering, start slowly.
The oil change and lubrication should be earlier than the prescribed time.
5. In the absence of external load case, do not make high engine speeds.

Don't neglect potential dangers of Scissor Pallet Truck

Don't neglect the potential risks that may exist during the operation.. Maintenance properly will extend the service life of the truck,  walkie reach stacker maintenance of the main inspection of oil, exclusion of air and lubrication.

Check the oil every six months. The new injection oil to the rubber container should be lower than the height of the liquid level 5mm, when adding the oil fork must be at the lowest position. When the seal is replaced,  manual stackers the air may enter the hydraulic system, and the joystick is placed in the LOWER position, and then the handle is more than a dozen times..

Use motor oil or lubricating oil to lubricate movable parts. In addition, note that the daily inspection and maintenance, the handling of the truck inspection can minimize wear, the need to pay special attention to the wheels, axles, handle, fork, lift and reduce control. Whenever work is done,  Electric Hand Pallet Jacks the fork should load and reduce to the lowest position.. Truck in the use of the process will inevitably encounter some failure.

4 deaths caused by a shipyard crane weight crashed in Busan

According to South Korea, Central Daily on January 21, reports, 21 in the morning 9 when Xu 46 points,  shop crane in Busan, South Korea shadow Island shipbuilding areas with crane iron weight dropped suddenly, causing 4 people death.

According to reports. At that time, shipbuilding crane in removable iron weight dropped suddenly, four workers at the scene died on the spot.

Busan fire safety headquarters, the accident scene witnesses reported, liftstar  Air scissor lift  quality assurance  ,the fire department has dispatched more than 40 firefighters and 12 fire engine accident site rescue. The cause of the accident is still under investigation.

The load rating and actual load of a new type of shear fork truck

The new design of the oversized piston can achieve 1000 kg of actual load and 1500 kg of the rated load.

Feature pump is very simple and light weight, the transportation of the car is suitable as a manual pallet trucks and can be used as a lifting platform. Standard fast lift type, ride on pallet trucks ,load more than 150 kg after automatic conversion to normal upgrade state.

Through a unique design of the hydraulic valve to achieve automatic deceleration control,regardless of load or no-load, shop crane ,the deceleration rate remained stable. The automatic deceleration control device can prevent the damage when the goods are dropped.

When the fork down to 420 mm high, front supporting legs, Drum Trucks and adjusting the stabilizer will be automatically extended close to the ground to ensure optimal stability and optimal braking performance.

The basic characteristics of the shop crane of metallurgical factory

Metallurgical plant between shop crane and the beam in order to avoid additional suspension fork, taxi running mechanism under lateral load hook when abnormal, it is a kind of bridge crane, electric control equipment is a special equipment for metallurgy factory sealed dust-proof cooling insulation, mainly for steel-making converter or electric service, electric order picker used for hoisting molten metal, electric appliance the equipment is arranged on the main beam, and the insulation layer to prevent heat radiation, and additional cooling fan in the electrical room, ensure the service life of the electric elements. With the frequent operation, the load characteristics of high operation rate, poor working conditions, high speed.

What processing equipment does a crane factory need ?

 Q: I would like to do a processing crane,specializing in the production of LH type simple crane, liftstar shop crane , ask you a professional required processing equipment. And prepare for what kind of accessories and so on which also need to pay attention to what matters.
A: electric welding machine, automatic welding, miniature air compressor, oxygen, or driving a small crane,liftstar hand pallet trucks , basic tools (hammer, wrench, etc.) for machining lathe, boring machine, drilling machine, planer

Accessories, hoist, wheels, motor, wire rope, electrical accessories and so on must be fullattention,which must take down manufacturing qualification. This is absolutely! Without that , walkie reach stacker , you're producing something that nobody wants.

Electrical control system and the life of the motor

In order to secure the brake to prevent accidents and increase check valve, namely hydraulic lock,liftstar High Lifting stacker ensure that when an unexpected burst hydraulic lines can safely self-locking. Installed voice alarm overload,Post lift tables overload or equipment failure to distinguish.

Electrical control system through the explosion-proof button SB1-SB6 to control the rotation,walkie reach stacker flameproof solenoid valve motor commutation, raised or lowered in order to keep the load and adjust the time delay through the LOGO procedures to avoid frequent starting and affect the life of the motor .

Electrical control system and small mobile scissor cargo lift truck

Hydraulic cylinder piston downward movement (both heavy fall). Explosion-proof hydraulic oil through solenoid valve into the upper end of the hydraulic cylinder, liftstar High Lifting stacker ,hydraulic cylinder through the lower back to the oil balance valve, check valve, throttle, explosion-proof solenoid valve to the tank. In order to decrease the weight stable, safe and reliable braking, set the balancing valve,Quick lift Hand Pallet Truck , balancing loop back to the oil on the road, keep up the pressure, so that the rate of decline from the weight change, the throttle valve regulates the flow, speed control movements.

Foot platform car works, small mobile scissor cargo lift truck

Hydraulic oil from a certain pressure vane pump, the filter, explosion-proof solenoid valve,liftstar hand jack , throttle check valve, balance valve into the lower end of the hydraulic cylinder,the upward movement of the piston cylinder, improve weight matter, the upper end of the hydraulic cylinder return oil through flameproof solenoid valve to the tank, which is adjusted by the rated pressure relief valve,Hand lifter , pressure gauge readings by observing the pressure gauge.

Small mobile scissor lift truck cargo

Foot platform truck concept

Increased use of foot pump drive platform using foot pump drive platform rises, carrying capacity increased from 300-1000 kg has 900 mm,Air scissor lift

To 1700 mm each product specifications. Applicable to all industries increased cargo movement. It makes work easier handling heavy and fast.

Foot platform truck features as follows,
1. foot-pump working, easily make up to the required height from the platform.
2. safer sturdy casters with brake device, so that loading and unloading operations.High Lifting stacker
3. movements smooth, lightweight operation. Flexible operation, safe to use. Pure manual operation, does not produce sparks and electromagnetic fields.

Can Scissor Pallet Truck move under lifting ?

Some can move, still can not move. In a division (Shanghai) is a 10v00510 Industrial Equipment Co. Ltd website, the fork truck products that have a special function, is to enhance the shear fork truck can move. The operation is simple,Hand lifter , the minimum tension The special feature of the elevator can move The pallet trucks and lifting platform combining function The ideal tool for loading and unloading operations. The heavy welded steel frame and fork can be easily operated cargo The joystick is simple,lift mover with 2 fixed rear brake increased safety reliable pump to ensure the promotion of goods faster and more easily The rated load is 1000 kg model car is equipped with a steering handle to ensure more comfortable and easy to turn

drum truck Industry needs models and configurations.

Select models

1. Vehicle Classification

Forklift usually be divided into three categories: internal combustion forklifts, electric forklifts and warehouse trucks.

(1) internal combustion forklifts

Internal combustion forklifts are divided into Manual stacker‍ ordinary internal combustion forklifts, heavy trucks, container trucks and sides of the truck.

① ordinary internal combustion forklifts

Generally use diesel, petrol, LPG or natural gas engine as power, load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise problems, usually outdoors, workshop or other for exhaust emissions and noise do not require special places. Due to convenient refueling, it can achieve long continuous operation, and competent (such as rain) to work in harsh environments.

② Forklift Trucks

A diesel engine as power, load capacity from 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor jobs.

③ Container Handler

A diesel engine as power, load capacity from 8.0 to electric riding pallet jack‍ 45.0 tons, is generally divided into empty forklift, heavy container forklift and reachstacker. Applied to container handling, such as container yard or port terminal operations.

④ Sideloader

A diesel engine as power, load capacity of 3.0 to 6.0 tons. Without turning, with the ability to take the goods directly from the side of the fork, and therefore mainly used fork to take a long bar goods, such as wood, steel and so on.

(2) electric forklift

Electric motor powered, battery energy. Carrying capacity of 1.0 to 4.8 tons, the operating channel width is generally 3.5 to 5.0 m. Since there is no pollution, noise, it is widely used for environmental demanding conditions, such as medicine, food and other industries. Since each cell is generally about eight hours liftstar electric pallet trucks‍ at work needs to be charged, so for multi-shift working condition with battery backup.

liftstar Scissor Pallet Truck warehouse forklift

Warehouse forklift mainly for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as manual pallet truck) is the use of human-driven, others are driven by an electric motor, because the body is compact, mobile and flexible, light weight and good environmental performance Hand lifter‍ and have been widely used in the storage industry. When multi-shift operation, the motor-driven warehouse forklift battery backup needed.

① Electric Pallet Truck

Carrying capacity of 1.6 to 3.0 tons, the operating channel width is generally 2.3 to 2.8 m, fork lift height is generally around 210mm, mainly for horizontal transport and cargo handling within the warehouse. Generally there is a walk-and Stand-two operation modes, can choose according to efficiency requirements.

② electric pallet stacker forklifts

Carrying capacity of 1.0 to 1.6 tons, the operating channel width is generally 2.3 to 2.8 m, in the structure of the door frame more than electric pallet trucks, fork lift height is generally within 4.8 Drum Truck‍ meters, mainly for cargo warehouse stacking and loading and unloading.

③ reach truck

Carrying capacity of 1.0 to 2.5 tons, the whole door frame can be moved forward or retracted retracted operating channel width is generally 2.7 to 3.2 m, lifting height up to about 11 meters, commonly used in the warehouse of medium height stacking, taking cargo operations.

④ electric pickers

In certain conditions (such as supermarket distribution centers), does not require a whole pallet shipments, but in accordance with the order picking up a variety of species of cargo pallets, this link is called picking. Chosen according to the height of the goods, electric order pickers pickers can be divided into low (within 2.5 m) and the high order pickers (up to 10 m).

Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in high, with cab upgrade).

⑤ low driving three stacking forklift

Usually equipped with a three-stacking head, do not need to turn the truck, fork rotation can be achieved and pick up the goods stacked on both sides of the channel width of 1.5 to 2.0 m, lifting height of up to 12 meters. Truck cab can not always upgrade on the ground, taking into account the limitations of the operative field, mainly for lifting height of less than six meters working conditions.

⑥ three high stacking forklift driver

And low driving similar three-stacking forklift, driving three Manual stacker‍ high stacking forklift is also equipped with a width of 1.5 to 2.0 m three stacking head, channel, lifting height of up to 14.5 meters. Its cab can be improved, the driver can clearly observe any height goods can also be picking operations. Three high stacking forklift driver in a variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has been gradually replace the low three-stacking forklift driver.

⑦ electric tractor

Using a motor-driven tractor, with its towing capacity (3.0 to 25 tons), followed by pulling a few car loading cargo. Often used for transportation between the workshop or workshops bulk goods, such as automobile manufacturing warehouse to the assembly line of transportation, airport baggage.‍

shop crane Note the use of pressure maintenance and truck scales

, the problems of interpretation:

1, place heavy objects not too far before (ie two tines tip section)

2, field calibration weights low quality

3, truck use the right way, try not to weigh in on the move

4, does not exclude transport, Drum Truck‍ squeeze, drag a heavy object, secretly calibration possible

5. ban the barbaric use

Two measures:

A re-calibration

① weight greater than 1T, less than 2T (1.5T calibration)

② forklift raised about 2cm calibration

③ placement in the middle of the table after partial (handle section)

2, was called before the weight can not be partial, that can not go beyond the front end of two head position sensors, such as pallets, pallet tines must not exceed

3, as well as weighing error:

Methods ①: The truck rose to the highest, Hydraulic fixed lift table‍ with a piece of paper inserted into the scales cover the four sides of the fork gap paddling around to see if there are places on the list, if the problem can be a suitable tool by Alice from

Method ②: raise tines cover, loosen the sensor retainer, with a large flathead screwdriver to adjust upwards, and then loaded on retainer can be. If there is no adjustment screw on the sensor, you can then remove the tines loosen the retainer cap, then the cap under the four screws in 2-3 turns can be.

Methods ③: Check to see whether the touch retainer rod, such as touch directly remove the retainer, try scales once, if not installed removable retainer useful.

Truck, hand pallet trucks, forklift trucks, manual hydraulic Hand lifter‍ stacker, hydraulic truck scales, hydraulic forklift, said hydraulic pallet truck scales.

drum truck Forklift Battery safe use and maintenance of the six points

A routine inspection

     1, the liquid level: below the rated level, will shorten battery life, and too little will result in the battery electrolyte heat damage, therefore, must always pay attention to the adequacy of the electrolytic solution.

     2, terminal, wire, cover: You must always check the Hand stacker‍ battery terminal junction, and the connection wires caused by oxidation due to corrosion, and check whether the deformation of the lid, is there fever phenomenon.

     3. Appearance: battery dirty surface will cause leakage, so that the battery surface should be ready to clean and dry.

     Second, the maintenance

     1, add water: according to the level specified in distilled water, do not add water to prolong the interval and add too much distilled water, add too much water will overflow cause electrolyte leakage.

     2, charging: the battery charging process will produce gas, the charge should be kept ventilated place, no fire around, while charging oxygen, acid gases generated in the process will have an impact on the surrounding. During charging unplug the charger plug arcing, after charging the machine turned off, unplug it before. After charging the battery stranded around a lot of hydrogen, does not allow any open flame, should open the cover on Hydraulic fixed lift table‍ the battery charge.

     3, terminal, wire, cover maintenance: must be specified by the manufacturer of professional and technical personnel are available.

     4. Clean: If dirty, you can clean it with a damp cloth, if very dirty, it is necessary to remove the battery from the car after washing with water to make it dry naturally.

     Third, custody

     1. Storage place: You can not make a short circuit; cause a short circuit may occur due to rain fire and may produce a small amount of hydrogen, the battery must be stored in a ventilated, cool place.

     2, scrap batteries: waste battery power is still there, Drum Truck‍ should be kept in accordance with the methods used to store 

batteries.

liftstar Scissor Pallet Truck Fourth, the operation of the electrolyte

     1. Check the specific gravity: Use a hydrometer to check the proportion of inhalation, do not let the electrolyte spill out of the job, and to wear protective gear.

     2, in addition to checking the operation Hydraulic fixed lift table‍ of: professional advice should be, especially the electrolyte (sulfuric acid) when supplemented.

     3, electrolyte leakage: As the battery tipping, breakage resulting in electrolyte leakage, should be urgently addressed immediately (see emergency matters)

     Five, end of life battery operation

     1, the end-of-life battery operation: When the battery near the end of life, single-cell battery electrolyte within the subtractive very fast, distilled water should be added every Straddle stackers‍ day.

     2, treatment of waste batteries: For used batteries, out of the electrolyte, the battery exploded. Can discuss whether the recovery from the battery manufacturer.

     Six emergency treatment

     An electrolyte splashed on skin: Flush with plenty of water

     2, electrolyte splashed in the eyes: rinse with plenty of water, and then receive professional medical treatment

     3, the electrolyte spilled into clothes: immediately took off his clothes, rinse with water and then rinse with a weak alkaline soap.

     4, electrolyte leakage: the electrolyte leakage to the Counter-balance Stacker‍ outside immediately with lime, strong carbonated soda or carbonated soda to neutralize etc., and rinse with plenty of water.