1, see the leakage situation, the focus is: the pipe joints, brake pumps, lifting cylinders, water tanks, engines, transmissions, drive axle, pressure steering, steering cylinders and so on.
2, tire pressure view: lack of compensation should be made to the specified value, admit that no leakage. Check the tire on the ground and the side of the surface without damage, the rim is not deformed.
3, the view of the polyurethane tires: view the road conditions with the same, look at the tire is not a greater degree of wear and tear, the device has a markings of the tires, the wheel should pay attention to the direction of rolling symbols.
4, brake fluid, water View: View brake fluid is not in the range of scale, and see the brake pipe is not mixed into the air. Increase the brake fluid, to avoid dust, water mixed into. When adding water to the tank, use clean water, if the use of antifreeze, should return the same antifreeze. When the water temperature is higher than 70 degrees, open the tank cover, open the lid, the pad a thin cloth, do not wear sets of water tank cover.
5, electric storage semi electric stacker hydraulic oil, electrolytic view: first set out the oil scale, wipe the foot after the first insert and then pull out to see if the oil level is not between the two lines. The oil level in the working tank should be between two tick marks; the oil is too small and the air will be mixed in the pipe, and too much will overflow from the cover. Battery electrolyte is also the same to be between the upper and lower tick marks, the lack of distilled water will be added to the top line.
6, brake springboard, micro pedal, hand brake View: depress the pedal to see if there is abnormal dull or stuck. Recognize the safety and reliability of the electric forklift handle.
7, belts, speakers, lights, appearance, etc. View: View the electric forklift belt tightness is not in line with the provisions of the adjustment of the margin or damage without cracks, to be replaced; speakers, lights, the appearance should be normal and useful.
8, battery protection: electric forklift should pay special attention to the timely charging of the battery and battery and protection, battery charging should pay attention to the way, it is necessary to make the battery enough electricity, and can not form a battery overcharge. Found that the lack of electricity, you should quickly charge to avoid excessive battery discharge.
9, the vehicle is running, do not "forward, backward" direction switch mistaken as a steering switch.
10, put the oil filter sediment.
11, check the consolidation of the various parts of the situation, the focus is: fork support, lifting chain tension screw, wheel screws, wheel fixed pin, brake diverter screw.
12, view the steering of the reliability, flexibility.
13, clean electric forklift dirt, dirt and scale, the key parts are: fork and gantry slide, generators and starters, battery electrode fork tank, air filter.