Common Problems and Maintenance Methods of Semi - electric Stacker

Doubt one: balance heavy heap car mast tilt, mast imbalance, how do?
In this case, we must first analyze its elements. The most important thing is the valve valve stem valve failure; tilt the cylinder wall and the ring over-wear; tilt too much fouling or seal too tight and so on. Then we can be able to analyze each and every one because of the past. For example, the replacement of new springs and seals, seals too tight can also be adjusted.
Doubt two: balance heavy Electric Riding Pallet Jack car drive wheel speed reduction situation, how to do?
The high speed of the drive wheel of the Electric counterbalance stacker may drive the motor seriously overloaded mainly because the battery voltage is too low or the pile head is too touchable, the cleaning pile head can reduce the resistance and the battery voltage is low to replace the new battery.
Question 3: stacking car circuit is not working properly, how do?
There may be two elements of this situation, respectively, electrical box within the micro-switch damage may be improperly adjusted or the main circuit fuse may control the electrical fuse fuse. If it is the former, then only need to replace the micro switch, adjust the orientation from scratch; if the latter elements caused by the need to replace the same type of fuse.