2017年7月3日星期一

Hydraulic circuit of semi - electric stacker

Principle of Working Principle of Semi - electric Stacker
(1) semi-electric stacker car circuit: by the battery power supply, power flash battery capacity or voltage; with low-voltage protection, more intuitive performance work; key switch control full loop, built-in charger with conversion relay Switch, charge automatically when the power supply, more secure, more reliable. The selection of the harness is satisfactory for the operation of the full circuit. All electrical components of the selection of safe and reliable.
(2) semi-electric stacker of the hydraulic circuit: the need to improve or cut down the fork, by scheduling the hydraulic lever, the pump station can be completed through the cylinder truck moving, the outer mast and the relative movement of the carriage, the fork up and down The The pressure limiting valve is contained in a hydraulic pump to protect the vehicle and the hydraulic system in the event of an overload.
(3) semi electric stacker parking brake: through the foot brake operation, the brake directly on the caster, immediately play the role of brake brakes.
(4) Electric Fork Over Stackers steering operation: steering operation of the handle through the steering arrangement on both sides of the steering wheel, rolling more concise, active, and thus directly turn the handle to the desired point of view can be.
(5) semi-electric stacker drive: semi-electric stacker through the human to promote the walk, the choice of special skills nylon or polyurethane wheel, wear, pressure, mute. Manual control, operating active, simple.
(6) semi-electric stacker How it works: semi-electric stacker car movements through the operation of the lift rod, control pump station work directly through the cylinder truck moving, the outer mast and the relative movement of the carriage, the fork up and down The
(7) semi-electric stacker structure: mast steel, battery, motor, hydraulic site, piston rod, chain, wheel, handle and other components.

没有评论:

发表评论