add a little oil, gear oil and grease.

check the electrical parts of the joints, lines, lighting, etc. is intact and connected. Electrical instruments and speakers, lights are in working order, battery electrolyte fluid level check for compliance; relative density of the electrolyte is in compliance with requirements.
2, check the forklift (forklift) or DC motor and engine lubrication conditions and control forklift lubrication lubrication points, add a little oil, gear oil and grease.
3, check forklift jacks parts lines and fittings for damage, loose and leaking oil. Particularly brake hydraulic system and the master cylinder, wheel cylinders for leakage.
4, check the tire pressure is in compliance with the requirements, vehicle tools and accessories are complete. New forklift during the initial period, the rough surface of the parts processing research not yet fully flat shape after machining and assembly location there are still some bias, with the gap and there will be a gap lubrication conditions, wear and tear to be bigger, relatively speaking working temperature slightly higher.
5, check the mechanical couplings forklift tightening, especially steering system, wheels and tires, and other lifting mechanism and locking bolts are tightened to the correct device.Is a unique means of clamping, lateral, rotation and other functions, goods can be transported more safely or piled high or handling, and thus minimize the extent of loss of the goods. Is also reduced with the use of the frequency of use of the tray, the corresponding purchase and maintenance costs have also been reduced.
2, safe and reliable operation, reducing the accident rate
By a professional forklift truck manufacturer to design and production conditions for different industries, attachments are designed with safety devices, in exceptional cases when the clip (or fork) of the goods is not easy to fall, such as a folder dwell generic device; sway generic devices with the end of the buffer, reducing the accident rate.
3, high production efficiency, low running costs
Mechanized handling than conventional manual handling operations a short time, while reducing labor expenses and costs, improve work efficiency. Handling in the same cycle, significantly reduced number of operations of the truck, the truck corresponding tires, transmission gear, fuel consumption is reduced accordingly, operating costs are reduced accordingly.