Full Electric Stacker specific use

August 1, 2012 Read 1719 times Tags: Full Electric Stacker Stacker measured using the method
Summary: the storekeeper Full Electric Stacker understand the characteristics and structure, to grasp the full scissor pallet truck stacker shelves operating procedures, precautions, routine maintenance.
One purpose: to make storekeeper Full Electric Stacker understand the characteristics and structure, to grasp the full electric stacker shelves operating procedures, precautions, routine maintenance.
Two methods of operation:
    Warehouse workers must be familiar with Stacker venues in the open, to be on the shelves only after basic familiarity floor, second floor use, familiarity month later, before operating three, four, five cargo stacked.
    1, Stacker start: check to make sure the battery is fully charged and indicator lights. Insert the key into the electric lock in a clockwise rotation, lift the emergency stop switch to activate the stacker.
    2, Stacker forward / backward: the stacker control handle to pull his side, swing down a proper angle. (Left upright position but not pressure to the lowest position), then turn the two rotary switches thumb: If this switch to move forward, then piled high car forward, if this switch to turn back, then Stacker Back . Forward / reverse speed of the rotation angle of the rotary switch thereby to control the size, the surrounding space at startup or small, in order to ensure safety, should control the rotation angle was smaller, in order to slow down the speed. There are low-speed button on the handle, press the limited low speed.
    3, stacker fork lift: Press the control handle with finger painted on the button marked rise, then fork up; press the button marked decline painted, then fork down; stopped immediately after the opening movements.
    4, beginning belly security: When Stacker backward, such as body collision red belly switch, Stacker will stop immediately, and to reverse the direction of movement forward a short distance, which is mainly to prevent harm to your body being squeezed .
    5, Stacker General Parking: When you need Stacker smooth stop, loosen the thumb, rotary switch will automatically reset, this time through the controller generates the reverse current, Stacker Jiangzai minimal distance movement After a smooth stop.
   6, vehicle charging: When the gauge was flashing signal that "depleted" alarm, should be promptly charged. When charging, the first electric locks closed and pulled out the key from the electric lock.