2013年8月6日星期二

Explosion-proof Electric Stacker specific measures


Stacker is the probability of an accident explosion forklift ignition source probability and probability of occurrence of an explosive mixture when operating the product. Explosion-proof electric forklift trucks in operation, in order to ensure safe operation of the truck must be effectively controlled ignition sources, including:
(A) to make up to 300-500 ℃ diesel exhaust temperature falls below a specified temperature class the following (such as less than or equal to 135 ℃).
(2) may be required to eliminate vehicle operation and to prevent static electricity generated outside of the vehicle, the rear and fork fire due to collisions.
(3) due to inhalation of diesel engine intake flammable gases or vapors cause speeding out of control.
(4) diesel exhaust flames and scissor pallet truck transfer to the surrounding atmosphere.
(5) the normal combustion engine or accidental explosion flame flashback through the intake system.
(6) when the forklift appeared temperature, exhaust temperature, oil temperature and high surface temperatures, which are not normal conditions, you should be able to make timely and automatic shutdown engine flameout.
Forklift Maintenance Collection
1 Fork supporting, lifting chain tensioner studies screws, wheel bolts, wheel fixing pins, brake steering screws, check the steering reliability, flexibility. Electric forklift cleaning dirt, mud and dirt angstroms, key parts are: fork frame and door frame slide, generator and starter, battery electrodes fork tank, air filter.
2, the brake springboard inching pedal,Hand pallet jacks brake check: Depress the pedal to check for abnormal slow or jam. Confirm the safety and reliability of electric forklifts handle. Speakers, lighting, instrumentation and other tests.
3, check leakage, focusing on: all fittings, brake pump, lift cylinder, transmission, drive axle, steering pressure, steering cylinder and so on. Tire Pressure Check: insufficient should be added to the specified value, confirm no leakage. Check the tire tread and the side without damage, the rim is deformed. Polyurethane tire check: Check road conditions, to see if there is a greater degree of tire wear, the pattern of the tire is mounted, the wheel in the rolling direction should be noted that tag.
4, electric forklift hydraulic oil, electrolytic examination: first allocate dipstick, wipe the feet and then pull out the head is inserted after checking the oil level is between the two tick marks. Working tank oil level should be between the two tick marks; too little oil, the pipeline will be mixed with air, too much will overflow from the cover. Battery electrolyte is also up and down the scale to be in between the lines, less will have to add distilled water to top line.
5, the battery maintenance: electric forklift use should pay particular attention to timely and maintenance of battery charging and battery, battery charging method should pay attention not only to make the battery is fully charged, it can not cause the battery from overcharging. Found that lack of electricity, should be charged as soon as possible to prevent excessive battery discharge. Cars running, do not "forward, backward" direction switch mistaken as steering switch.
6, brake fluid check: Check the brake fluid is in the range of the scale, and check whether the brake lines mixed with air. Add brake fluid to prevent dust and water mixed.

没有评论:

发表评论